CONE ART KILNS

Cone Art Kilns Inc. is a Canadian company that has been producing quality kilns for glass and ceramic artists since 1982.
They use only premium firebrick, Kanthal A-1 element wire, and stainless steel jackets and fittings to produce a sturdy, long lasting kiln that is backed up by a two (2) year warranty. The Cone Art excellence in design and craftsmanship results in a kiln that you can rely on firing after firing.
All Cone Art kilns are CSA and CUL approved to ensure the highest standards in quality and safety.

NOTE:
208 Volt models are also available. Some commercial buildings use 208V instead of 240V, therefore, you should determine which voltage is correct for your application. Residential properties are 240V.

All 208V and 240V models are supplied with the power cord wired to the kiln, but have no plug as these models are meant to be hard wired to a junction box which has been wired from the main panel. You're electrician will do this when he wires the kiln. This power cord measures eight (8) feet in length from the control box.

ALL KILNS WILL BE SHIPPED DIRECT FROM THE FACTORY

NOTE:

Freight costs won't show up when checking out - we will email you the freight cost for the kiln you've selected, and if you accept this freight cost, it will then be added to the price of the kiln

NOTE: TYPICAL TURN-A-ROUND TIMES FOR THESE KILNS IS 4-5 WEEKS CURRENTLY

KILNS LISTED HERE ARE THE MOST POPULAR SIZES THAT TEND TO BE ORDERED. OTHER SIZES AVAILABLE UPON REQUEST. WE'LL EMAIL YOU A PRICE FOR ANY KILN MANUFACTURED BY CONEART IF NOT LISTED HERE.

Sort by:Recommended

- 16% less
CONE ART KILN - B3K 115G-120V SQUARE KILN
This square kiln utilizes space very efficiently. With a 15" shelf size, you get more use of space than with any hex kiln of the same size. Perfect for glass slumping, fusing and annealing kiln for home or studio. It can be plugged into a regular wall outlet.
SPECIFICATIONS:
Chamber: 15.5" x 15.5" x 6.5"
Elements: Top fire
Electrical: 120V, 18A, 2.2KW (20 amp. circuit required)
Weight: 130 lbs. (shipping) (30" x 26" x 24" shipping size)
Controller: Bartlett 3 key digital controller. Maximum temperature: 1700 deg F
FURNITURE KIT: 1 - 14.5” x 14.5" x 5/8" kiln shelf 3 - 1" posts 1 kilogram kiln wash 1 - stand
- 16% less
  Market price:CA$1,927 you save CA$299.64
- CA$1,627.36
Sorry, we only have 972 of that item available
- 16% less
CONE ART KILN - V6 115G-120V SQUARE KILN
This square kiln utilizes space very efficiently. With a 15" shelf size, you get more use of space than with any hex kiln of the same size. Perfect for glass slumping, fusing and annealing kiln for home or studio. It can be plugged into a regular wall outlet.
SPECIFICATIONS:
Chamber: 15.5" x 15.5" x 6.5"
Elements: Top fire
Electrical: 120V, 18A, 2.2KW (20 amp. circuit required)
Weight: 130 lbs. (shipping) (30" x 26" x 24" shipping size)
Controller: Bartlett 6 key digital controller. Maximum temperature: 1700 deg F
FURNITURE KIT: 1 - 14.5” x 14.5" x 5/8" kiln shelf 3 - 1" posts 1 kilogram kiln wash 1 - stand
- 16% less
  Market price:CA$2,217 you save CA$346.04
- CA$1,870.96
Sorry, we only have 973 of that item available
- 16% less
CONE ART KILN - B3K 117-120V
The Tucker’s Cone Art Kiln Model B3K 117, is the perfect glass slumping, fusing and annealing kiln for home or studio. It can be plugged into a regular wall outlet. There are Kanthal A-1 elements in the lid and the walls are constructed of 2 ½" premium firebrick. The jacket and fittings are all corrosion resistant stainless steel.
SPECIFICATIONS:
Chamber: 14.5" x 6.5"
Elements: Top fire
Electrical: 120V, 14.4A, 1740W (15 amp. circuit required)
Weight: 130lbs.(shipping)
Controller: Bartlett 3 key digital controller. Maximum temperature: 1700 deg F
FURNITURE KIT: 1 - 13” dia kiln shelf 3 - 1" posts 1 kilogram kiln wash
- 16% less
  Market price:CA$2,500 you save CA$395.10
- CA$2,104.90
Sorry, we only have 995 of that item available
- 16% less
CONE ART KILN - V6117-120V
This is the same kiln as the one above, except it comes with a Bartlett 6 key digital controller.
SPECIFICATIONS:
Chamber: 14.5" x 6.5"
Elements: Top fire
Electrical: 120V, 14.4A, 1740W (15 amp. circuit required)
Weight: 130lbs.(shipping)
Controller: Bartlett 6 key digital controller. Maximum temperature: 1700 deg F
FURNITURE KIT: 1 - 13” dia kiln shelf 3 - 1" posts 1 kilogram kiln wash
- 16% less
  Market price:CA$2,785 you save CA$440.70
- CA$2,344.30
Sorry, we only have 999 of that item available
- 16% less
CONE ART KILN - B3K 2309G-240V SQUARE KILN
With a chamber size of almost 4 square feet, this kiln is an excellent choice for doing large amounts of glass fusing or slumping.
- 16% less
  Market price:CA$3,823 you save CA$597.96
- CA$3,225.04
Sorry, we only have 999 of that item available
- 16% less
CONE ART KILN - V6 2309G-240V SQUARE KILN
With a chamber size of almost 4 square feet, this kiln is an excellent choice for doing large amounts of glass fusing or slumping.
- 16% less
  Market price:CA$4,113 you save CA$644.36
- CA$3,468.64
Sorry, we only have 999 of that item available
- 16% less
CONE ART KILN - B3K 2313G-13-240V SQUARE KILN
With a chamber size of almost 4 square feet, this kiln is an excellent choice for doing large amounts of glass fusing or slumping.
SPECIFICATIONS:
Chamber: 23" x 23" x 13.5"
Elements: Top and side fire
Electrical: 240V, 30A, 7.2KW (40 amp. circuit required)
Weight: 250 lbs.(shipping) (48" x 48" x 52" shipping size)
Controller: Bartlett 3 key digital controller. Maximum temperature: 1700 deg F
FURNITURE KIT: 1 - 21" x 21" x 3/4" shelf 3 - 1" Posts 1 Kilogram Kiln wash 1 - stand
- 16% less
  Market price:CA$4,233 you save CA$663.56
- CA$3,569.44
Sorry, we only have 999 of that item available
- 16% less
CONE ART KILN - V6 2313G-13-240V SQUARE KILN
With a chamber size of almost 4 square feet, this kiln is an excellent choice for doing large amounts of glass fusing or slumping.
SPECIFICATIONS:
Chamber: 23" x 23" x 13.5"
Elements: Top and side fire
Electrical: 240V, 30A, 7.2KW (40 amp. circuit required)
Weight: 250 lbs.(shipping) (48" x 48" x 52" shipping size)
Controller: Bartlett 3 key digital controller. Maximum temperature: 1700 deg F
FURNITURE KIT: 1 - 21" x 21" x 3/4" shelf 3 - 1" Posts 1 Kilogram Kiln wash 1 - stand
- 16% less
  Market price:CA$4,518 you save CA$709.16
- CA$3,808.84
Sorry, we only have 996 of that item available
- 15% less
CONE ART KILN - B3K 4209-240V
The Tucker’s Cone Art Kiln Model B3K 4209 is our largest glass fusing and slumping kiln. It is a full 42" wide X 31" front to back and 9" deep. The lid and walls are 3" thick, which helps with slower cooling. The jacket and fittings are made from corrosion resistant stainless steel.
- 15% less
  Market price:CA$4,935 you save CA$759.50
- CA$4,175.50
Sorry, we only have 1000 of that item available
- 15% less
CONE ART KILN - V6 4209-240V
This is the same kiln as the one above, except it comes with a Bartlett 6 key digital controller.
- 15% less
  Market price:CA$5,220 you save CA$805.10
- CA$4,414.90
Sorry, we only have 1000 of that item available
- 15% less
CONE ART KILN - B3K 4213-240V
The Tucker’s Cone Art Kiln Model B3K 4213 is our largest glass fusing and slumping kiln. It is a full 42" wide X 31" front to back and 13-1/2" deep. The lid and walls are 3" thick, which helps with slower cooling. The jacket and fittings are made from corrosion resistant stainless steel.
- 15% less
  Market price:CA$5,570 you save CA$859.70
- CA$4,710.30
Sorry, we only have 1000 of that item available
- 15% less
CONE ART KILN - V6 4213-240V
This is the same kiln as the one above, except it comes with a Bartlett 6 key digital controller.
- 15% less
  Market price:CA$5,855 you save CA$905.30
- CA$4,949.70
Sorry, we only have 999 of that item available
CONE ART LID LIFTER
Lid Lifter for kiln models 23,28.
- CA$470.40
Sorry, we only have 999 of that item available
CONE ART LID LIFTER FOR MODEL 2323
Lid Lifter for kiln model 2323 Square Kilns
- CA$470.40
Sorry, we only have 998 of that item available
CONE ART LID LIFTER
Lid Lifter for kiln models 42
- CA$504.70
Sorry, we only have 1000 of that item available
GENESIS 2.0 KILN CONTROLLER by BARTLETT INSTRUMENTS
Genesis 2.0 Kiln Controller:

This unit will be the next generation of kiln controllers with its modern and intuitive user platform. But, because results are what counts, this one also includes the knowledge that is at the heart of every Bartlett controller. We design, manufacture and sell all of our controllers with our customers at the forefront of that process and we insist on procedures and systems to continue to be a reliable and consistent resource for artists. The control strategies that have produced so many successful firings with Bartlett controllers will only be enhanced by this new format of display and user interface. The Genesis 2.0 includes a larger processor for increased future capabilities as well as improved encryption for greater security.
This controller will make firing kilns just a little bit easier in these ways:
*touch-screen technology for the user interface
*easy-to-follow screen descriptions
*different user-interface levels, which can be set to match the user’s firing knowledge
*graphical display of the firing process right at the controller
*Store up to 30 custom user programs
*Up to 32 segments per program
*Ability to make adjustment during a firing such as add segments, add temperature, and skip segments
*Built in diagnostics testing for use with a current sensor
*Alarm
*Error Codes
*WiFi enabled for easy software updating
*Register your Genesis on our web site or mobile app for remote monitoring of your kiln
Please Note:
The Genesis 2.0 controller is a $411.60 option over and above the same kiln with a V6 controller. Controller, if ordered by itself would be $675.00.
- CA$411.60
Sorry, we only have 999 of that item available
GENESIS 2.0 KILN CONTROLLER by BARTLETT INSTRUMENTS (OPTION FOR JUST THE CONTROLLER)
Genesis 2.0 Kiln Controller:

This unit will be the next generation of kiln controllers with its modern and intuitive user platform. But, because results are what counts, this one also includes the knowledge that is at the heart of every Bartlett controller. We design, manufacture and sell all of our controllers with our customers at the forefront of that process and we insist on procedures and systems to continue to be a reliable and consistent resource for artists. The control strategies that have produced so many successful firings with Bartlett controllers will only be enhanced by this new format of display and user interface. The Genesis 2.0 includes a larger processor for increased future capabilities as well as improved encryption for greater security.
This controller will make firing kilns just a little bit easier in these ways:
*touch-screen technology for the user interface
*easy-to-follow screen descriptions
*different user-interface levels, which can be set to match the user’s firing knowledge
*graphical display of the firing process right at the controller
*Store up to 30 custom user programs
*Up to 32 segments per program
*Ability to make adjustment during a firing such as add segments, add temperature, and skip segments
*Built in diagnostics testing for use with a current sensor
*Alarm
*Error Codes
*WiFi enabled for easy software updating
*Register your Genesis on our web site or mobile app for remote monitoring of your kiln
Please Note:
The Genesis 2.0 controller is a $395.00 option over and above the same kiln with a V6 controller. Controller, if ordered by itself would be $635.00.
- CA$675
Sorry, we only have 998 of that item available