STAINED GLASS BANDSAWS & ACCESSORIES

Choose from a variety of stained glass equipement such as the Gemini Taurus 3 ringsaw, Gryphon bandsaws, Speedster bandsaws and Diamond Laser bandsaws.

Bandsaw blades and accessories are also included.

Products: 124 of 34
Drop items here to shop
Product has been added to your cart
  • STAINLESS STEEL BLADE FOR DL1000/3000 OR SPEEDSTER BANDSAWS

    STAINLESS STEEL BLADE FOR DL1000/3000 OR SPEEDSTER BANDSAWS

    Stainless Steel Blade for DL1000/3000
    • CA$88.62
  • DRIVE BELT FOR DL1000/DL3000 BANDSAWS

    DRIVE BELT FOR DL1000/DL3000 BANDSAWS

    Drive Belt for DL1000 and DL 3000 Bandsaws

    • CA$20.40
  • TURBO STANDARD BLADE FOR OMNI 1 AND OMNI 2

    TURBO STANDARD BLADE FOR OMNI 1 AND OMNI 2

    3 blades/package - 100 grit
    • CA$30.98
  • TURBO FINE BLADES FOR OMNI 1 AND OMNI 2 SAW

    TURBO FINE BLADES FOR OMNI 1 AND OMNI 2 SAW

    3 blades/package - 120 grit
    • CA$29.98
  • GUIDE SET FOR OMNI 1 AND OMNI 2 SAW

    GUIDE SET FOR OMNI 1 AND OMNI 2 SAW

    Guide Set for Omni 1 and Omni 2 saw
    • CA$9.50
  • CHUCK/SCREW FOR OMNI 1 AND OMNI 2 SAW

    CHUCK/SCREW FOR OMNI 1 AND OMNI 2 SAW

    Chuck for Omni Saw
    • CA$9.50
  • BLADE GUIDES for GRYPHON C BANDSAW

    BLADE GUIDES for GRYPHON C BANDSAW

    These guides fit the Gryphon Model "C" bandsaw.
    4/pck.
    • CA$9.50
  • STANDARD BLADES for GRYPHON C40 BANDSAW - 2 PACK

    STANDARD BLADES for GRYPHON C40 BANDSAW - 2 PACK

    A package of two diamond blades. This is the standard blade and the blade that was originally supplied with your saw.
    • CA$197.98
  • FUSERS BLADE for GRYPHON C40 BANDSAW

    FUSERS BLADE for GRYPHON C40 BANDSAW

    This is a heavy duty diamond blade designed for cutting thicker material such as fused glass or thick rock. This blade has coarser diamonds and a thicker base. It leaves a rougher edge than the standard blade and cannot make as sharp a turn as the standard blade.
    • CA$112.98
  • BAND REPLACEMENTS for GRYPHON "C" BANDSAW

    BAND REPLACEMENTS for GRYPHON "C" BANDSAW

    The band replacement kit for the Gryphon "C" bandsaw consists of:

    1 - Upper band

    1 - Lower band

    1 set of Lower wheel bushings

    • CA$42.90
  • TAURUS 3 RING SAW

    TAURUS 3 RING SAW

    Gemini has taken the best saw on the market, and made it even better in their search for perfection. The Taurus 3 saw includes an instructional DVD with cutting tips, maintenance pointers and accessories that are available.

    THE T3 SAW THAT WE SELL IS CSA APPROVED - PURCHASING A NON-CSA APPROVED UNIT IS NOT
    ONLY ILLEGAL IN CANADA, YOU CAN LOSE YOUR HOUSE INSURANCE




    • CA$747
  • SEMI-AUTOMATIC FLOATING TRAY FOR T3 RING SAW

    SEMI-AUTOMATIC FLOATING TRAY FOR T3 RING SAW

    Product Features

    Pull back the tray and let it cut for you, hands-free!
    Make precision cuts with ease
    Able to cut 90° and 45° cuts
    Adjustable tension knob can be adjusted for both delicate and thick pieces
    Magnetic angles feature no-slip rubber to keep your pieces safe and in place
    Fits on top of your Taurus 3 Ringsaw - Sold Separately

    • CA$592.80
  • TAURUS 3 RING SAW STANDARD REPLACEMENT BLADE

    TAURUS 3 RING SAW STANDARD REPLACEMENT BLADE

    The Taurus 3 Standard Blade - Stained glass pattern and all around multi purpose cutting blade. Its action is omni-directional. This is to say that it cuts the same speed and kerf, (swath left by the blade), in any direction. This blade was the first blade to be put on saws and makes pattern cutting very easy because the user does not have to turn the piece while cutting but simply move it in any direction.

    Blade Shape: Round .072 Diameter (note 1/16" equals .063 and 1mm equals .0394) Grit is aggressive.

    Material Thickness Capacity: 3/8", normal use is 1/8" art glass, 1/4" soft wall tile.

    What to Avoid: Do not use for ceramic tile, 3/8" fused glass pieces, or thick material in general.

    Average Blade Life: 40-60 hours

    Comes with (2) orange replacement grommets.

    • CA$153.92
  • TAURUS 3 RING SAW MEGA BLADE

    TAURUS 3 RING SAW MEGA BLADE

    The Taurus 3 Mega Blade - This heavy duty blade is hungry for whatever you can feed it. It is almost unbreakable so it is great for class settings. It has an opinion about which way it likes to cut because of its shape which is basically tear dropped. The round part of the tear drop faces outward and the pointed part faces inward. This means it cuts faster when pulling towards yourself and slower pushing away and slowest sideways. Its kerf is the same as a standard blade when pushing and pulling but it leaves a wide swath sideways. That said you can cut whatever you can fit into the mouth of the saw and the shape allows for creative shaping. Cutting action is omni-directional in thin material like stained glass but more forward and backward cutting for thicker harder materials. Leaves a smooth edge.
    Blade Shape: Tear Drop .072 Diameter (front) x .150 (front to back), inside is pointed. Grit is aggressive.
    Material Thickness Capacity: 3/4", normal use is fused glass, stained glass, ceramic tile, or stone. You may have to remove the stabilizer foot to use the full 3/4" capacity.
    What to Avoid: Do not cut thin dichroic glass as it will chip easily, demonstrate to students its action prior to letting them use it, explaining the tear drop shape and its unique action.
    Average Blade Life: 50-100 hours

    • CA$168.72
  • TAURUS 3 RING SAW SLIM BLADE

    TAURUS 3 RING SAW SLIM BLADE

    The Taurus 3 Slim Blade - Originally developed for the Taurus I thru II.2 series as a thinner version of the standard blade. It has the same dimension as a standard or separating blade front to back but is thinner as you look at it straight on. For this reason it i just as strong as a Standard Blade but can cut quicker front to back and leave a slightly smaller kerf, (.062). It cuts the same as a standard blade left or right and its action is omni-directional.
    Blade Shape: Oval .062 x .072 (front to back). Grit is aggressive
    Material Thickness Capacity: 3/8", normal use is 1/8" art glass, 1/4" wall tile.
    What to Avoid: Do not use for ceramic tile, 3/8" fused glass pieces, or thick material in general.
    Average Blade Life: 40-60 hours
    Comes with (2) orange replacement grommets.
    • CA$153.92
  • TAURUS 3 RING SAW FINE DICHROIC BLADE

    TAURUS 3 RING SAW FINE DICHROIC BLADE

    The Taurus 3 Dichroic Blade - This is the slim blade but coated it in super fine grit so that it does not chip even the thinnest of dichroic glass. Its cut is super quick and leaves the smoothest edge of all of the blades allows the use of lower firing temperatures in the manufacture of jewelry and the like. Neat crisp edges add a note of professionalism with this blade. Its action is omni-directional.
    Blade Shape: Oval .058 x .072 (front to back). Grit is finest.
    Material Thickness Capacity: 1/4", normal use is thinner than normal dichroic or iridized glass.
    What to Avoid: Do not use for ceramic tile, 1/4" fused glass pieces, or thick material in general.
    Average Blade Life: 40-60 hours
    Comes with (2) orange replacement grommets.
    • CA$168.72
  • TAURUS 3 RING SAW BLADE STABILIZER

    TAURUS 3 RING SAW BLADE STABILIZER

    Reduces grommet wear and gives you more control and stability when cutting thicker material. It adjusts easily to accomodate different thicknesses.
    • CA$38.34
  • BLUE PULLEY ASSEMBLY FOR TAURUS 2 & 3 RINGSAWS

    BLUE PULLEY ASSEMBLY FOR TAURUS 2 & 3 RINGSAWS

    1 blue pulley including the bearing for the Taurus 2 & 3 saws. This is the standard blue pulley assembly. NOT for use with the spring tensioner arm assembly. Click on the details of the image, and then select the detailed images to see the differences between the two pulleys.
    • CA$21.90
  • TENSION ARM ASSEMBLY for TAURUS 3 (TENSION SPRING ASSEMBLY)

    TENSION ARM ASSEMBLY for TAURUS 3 (TENSION SPRING ASSEMBLY)

    This is the complete tension arm assembly for the Taurus 3 Ringsaw. Instructions for assembly are included in the package.
    • CA$17.62
  • BLUE PULLEY #4 ASSEMBLY for TAURUS 2 & 3 RINGSAW

    BLUE PULLEY #4 ASSEMBLY for TAURUS 2 & 3 RINGSAW

    This blue pulley assembly is for use ONLY with the spring tensioner assembly on the Taurus 3 Ring Saws. The depth of the groove on this pulley is shallower than on the other standard blue pulleys. Click on the details of the image, and then select the detailed images to see the differences between the two pulleys.

    This blue pulley assembly is also used on the Taurus 2 Ring Saws as a replacement for Part #4 on the parts diagram.

    • CA$21.90
  • ORANGE GROOVE GROMMET ASSEMBLY FOR TAURUS 3 RINGSAW

    ORANGE GROOVE GROMMET ASSEMBLY FOR TAURUS 3 RINGSAW

    1 Orange Groove Grommet Assembly c/w Bearing
    • CA$24.86
  • ORANGE GROOVE GROMMETS FOR TAURUS 3 RINGSAW

    ORANGE GROOVE GROMMETS FOR TAURUS 3 RINGSAW

    Package of 2 Orange Groove Grommets for Taurus 3 Saws

    • CA$14.80
  • SUPERSLICER

    SUPERSLICER

    The Super Slicer is a device that gives you the ability to make repetitive, perfectly parallel, ultra thin cuts in any material that will clear the throat height of the saw, which is 1 1/2" on the Taurus 3 and 1" on the Taurus II.2. The Super Slicer can be adapted for use on other saws such as band saws as long as the blade will pass through the ribs.

    Examples where the Super Slicer can be useful are when cutting:

    Pattern Bars, Streamers, Milfiori, or virtually any other material that requires repetitive cutting.

    The Super Slicer has the ability to cut slices as thin as 1/16".

    • CA$65.76
  • TAURUS 3 RING SAW SLICER BLADE

    TAURUS 3 RING SAW SLICER BLADE

    The Taurus 3 Slicer Blade - This is the thinnest blade and only cuts forward and backward. It can grind slightly left and right, but take your time and it will turn on a dime or smaller. Its action is just like that of a band saw but infinitely better in that you rotate the material into the blade as you are cutting but you can in the middle of the cut without binding and head off in any direction either backwards or forwards. This blade was developed for slicing material quickly with a thin kerf (.040, 1mm) and it is the blade we recommend for use with the Super Slicer, (a jig for slicing pattern bars and rods into thin repeatable wafers). Also it has finer diamond so the cut is even smoother than all the other blades except for the dichro blade. Use this blade with the heavy duty flocked belt to avoid splitting. This blade can turn on a dime and do very intricate designs once you get used to it. Glass fusers love it.
    Blade Shape: Flat .040 width x .150 length. Grit is fine.
    Material Thickness Capacity: 3/4", normal use is for slicing thin wafers in rods and pattern bars, and scroll cutting of fused glass up to 3/8" thickness.
    Average Blade Life: 50-100 hours
    Comes with (2) orange replacement grommets.
    • CA$168.72
Products: 124 of 34