FUSING TOOLS

Products: 116 of 16
  • POLAROID FILTER SET

    POLAROID FILTER SET

    The Polaroid filter set contains two (2), Polaroid filters and is used to test for stress in fused or lampworked glass pieces.
    Each filter measures 3" x 3", and is protected on one side with a thin, protective film, which should be carefully removed for best visibility.

    TO TEST FOR STRESS:
    Place one filter over a light source (a flashlight works well).
    Sandwich the glass between it and the second filter.
    Rotate this filter until it blocks out the light.
    At this point, (if stress is present), a halo or flare should appear around the perimeter or areas of attached glass.

    • CA$10.40
  • FINLEY FUSIBLE HANDY HANGERS

    FINLEY FUSIBLE HANDY HANGERS

    Finley Fusible Hanger Inserts - Package of 8 hanger pairs

    For use with fused glass projects. 

    The Finley Hanger is placed between two pieces of glass and fired in a kiln according to your project's specifications. The hanger is made to withstand heat up to 1800 - 2000 degrees. It is possible to fire the hanger multiple times if needed.

    The Finley is designed to hang your smaller fused glass pieces weighing up to 5 pounds.

    • CA$29.50
  • FRIT MAKER

    FRIT MAKER

    This Frit Maker allows you to make an assortment of frit and powder from scrap glass. Heavy duty, all steel construction. Magnet included. 152mm x 152mm x 305mm (6" x 6" x 12") The two piece mortar and pestle will produce a batch of frit in 20 to 30 seconds. The crushed glass makes a full assortment of frit from powder to course.
    • CA$69.10
  • FRIT SIFTER - 4 PC. SET

    FRIT SIFTER - 4 PC. SET

    This four (4) piece frit sifter set contains a different size mesh screen in each sifter. The tubs are 152mm (6") in diameter at the top, 95mm (3-3/4") in depth with a 114mm (4-1/2") screen diameter. Sifts frit to produce the following sizes: <0.2mm 0.2 - 1.2mm 1.2 - 2.7mm >2.7mm

    • CA$70
  • HAIK BRUSH - SMALL

    HAIK BRUSH - SMALL

    brush for applying shelf primer to molds & shelves.

    • CA$11.72
  • HAIK BRUSH - LARGE

    HAIK BRUSH - LARGE

    brush for applying shelf primer to molds and shelves.

    • CA$14.54
  • JCS SIFTER with COIL ACTUATOR

    JCS SIFTER with COIL ACTUATOR

    JC sifters are equipped with an easy to use 'coil actuator' that allow for one handed operation and are a great choice for lampworkers and fusers alike.
    The 40 mesh screen is perfect for glass powders and enamels. Also available in 60 mesh for CBS Glow pigment or extra fine enamels.
    JC sifters are made in the US with quality steel and brass construction with rubber coated handles.

    • CA$17.45
  • JC LINE & DOT APPLICATOR

    JC LINE & DOT APPLICATOR

    These line and dot applicators allow you to create a perfect fine line or various sized dots depending on the size chosen.

    • CA$17.45
  • POWDER SIFTER - WHITE - POWDERS

    POWDER SIFTER - WHITE - POWDERS

    An invaluable tool for the glass artist. These frit sifters are the right mesh sizes for achieving an even dispersal in powders and fine size frits.

    • CA$12.12
  • POWDER SIFTER - BLACK - FINE FRITS

    POWDER SIFTER - BLACK - FINE FRITS

    An invaluable tool for the glass artist. These frit sifters are the right mesh sizes for achieving an even dispersal in powders and fine size frits.

    • CA$12.12
  • POWDER SIFTER - MEDIUM

    POWDER SIFTER - MEDIUM

    1-1/2" dia.

    • CA$16.60
  • POWDER SIFTER - LARGE

    POWDER SIFTER - LARGE

    2-1/8" dia.

    • CA$18.52
  • LINE SIFTER - 1/16"

    LINE SIFTER - 1/16"

    Used to make accurate and even frit trails prior to firing.

    • CA$39.30
  • LINE SIFTER - 1/32"

    LINE SIFTER - 1/32"

    Used to make accurate and even frit trails prior to firing.
    • CA$42.44
  • COMBING RAKE - 15"

    COMBING RAKE - 15"

    A 381mm (15") stainless steel rake used to rake or comb a design into your glass while in the kiln. Complete with our custom aluminum handle and our heat, chemical & fire resistant handle cover.
    The rake portion measures 5mm dia. x 216mm (3/16" dia. x 8-1/2").
    • CA$15.33
  • GRAPHITE TONGS

    GRAPHITE TONGS

    Tongs assist shaping molten glass around bracelet molds and for any other hot glass shaping needs while fusing in the kiln.

    • CA$62.50