CHEMICALS

Adds unbeatable shine to solder and lead. Renews appearance of older tarnished projects. Seals and protects as you buff. Safe for all patina finishes. The magic is in the polymer base.

A new, all-purpose SUPER SAFE flux! Magic Gel Flux is a smokeless, fumeless, non-acid flux that goes on like a liquid but stays put like a paste to ensure complete solder joints. Instant acting and works great with all tin/lead and lead-free solders! Easily washed off with water, it is excellent for use on all tin/lead solder as well as lead-free alloys. 

8 oz. (237 ml.)

Use: 
- Thoroughly removes greasy mess and residues from all types of flux and solder
- Prevents oxidation crust from improper cleaning
- Allows copper patina to produce a bright shiny finish
- Makes clean-up quick and easy
- Biodegradable
- Evironmentally safe

Size: 8 Oz. bottle.

Remove oily flux after soldering and you'll prevent discoloring and oxidation that may occur with time. Just squeeze on flux remover, wipe with a damp sponge, rinse, and dry thoroughly. Flux remover is absolutely safe to use: non-toxic, non-abrasive, non-flammable and water soluble. You'll find your patinas turn out more uniform when you use CJ's.

Directions: 
Shake before using. Apply CJ's directly to finished piece immediately after soldering.
Scrub entire piece (glass, lead, solder joints) with soft brush and warm water, then
rinse clean. If using a patina, apply now and rinse again. 

Use: 
- Thoroughly removes greasy mess and residues from all types of flux and solder
- Prevents oxidation crust from improper cleaning
- Allows copper patina to produce a bright shiny finish
- Makes clean-up quick and easy
- Biodegradable
- Evironmentally safe

Size: 16 Oz. bottle.

Remove oily flux after soldering and you'll prevent discoloring and oxidation that may occur with time. Just squeeze on flux remover, wipe with a damp sponge, rinse, and dry thoroughly. Flux remover is absolutely safe to use: non-toxic, non-abrasive, non-flammable and water soluble. You'll find your patinas turn out more uniform when you use CJ's.

Directions: 
Shake before using. Apply CJ's directly to finished piece immediately after soldering.
Scrub entire piece (glass, lead, solder joints) with soft brush and warm water, then
rinse clean. If using a patina, apply now and rinse again. 

Use: 
- Thoroughly removes greasy mess and residues from all types of flux and solder
- Prevents oxidation crust from improper cleaning
- Allows copper patina to produce a bright shiny finish
- Makes clean-up quick and easy
- Biodegradable
- Evironmentally safe

Size: 1 Gallon Jug.

Remove oily flux after soldering and you'll prevent discoloring and oxidation that may occur with time. Just squeeze on flux remover, wipe with a damp sponge, rinse, and dry thoroughly. Flux remover is absolutely safe to use: non-toxic, non-abrasive, non-flammable and water soluble. You'll find your patinas turn out more uniform when you use CJ's.

Directions: 
Shake before using. Apply CJ's directly to finished piece immediately after soldering.
Scrub entire piece (glass, lead, solder joints) with soft brush and warm water, then
rinse clean. If using a patina, apply now and rinse again. 

Used to minimize contact exposure with most heavy metals: lead, nickel, cadmium, cobalt, zinc, mercury, copper, silver, and chromium. An excellent solvant-free degreaser. Deeply embedded grease and oil rinse away with the heavy metals. May be used in hot or cold, hard or soft water. 16OZ (473ml)

Universal space age adhesive. PRODUCT CAN'T BE SHIPPED DURING WINTER MONTHS TO AVOID FREEZING

Amchem whiting is a finely ground, naturally occurring Calcium Carbonate, 98% pure. Balance of components, silica or magnesium. As used in better grade glazing compounds or for cleanup after glazing or cementing. .680 kg (1.5 lb) container.

Amchem whiting is a finely ground, naturally occurring Calcium Carbonate, 98% pure. Balance of components, silica or magnesium. As used in better grade glazing compounds or for cleanup after glazing or cementing. 5 LB container

GlassPro stained glass cement is used to secure glass into lead came on your leaded glass panels. The use of this cement will harden and strengthen your projects for years to come. 

Easy to use, premixed formula in convenient 1lb jars.

Enhance glass scores for cleaner breaks while extending the life of your cutter! CJ's Glass Cutter Oil is made of natural oils and recommended for all glass cutters. It is non-toxic and environmentally safe. And, with a pour-spout cap, filling is a breeze!

Water soluble and cleans up with ordinary soap. (8oz bottle)

Ensures a bright, even, durable finish on solder seams treated with patina or electroplating. Polishes and protects against tarnish for professional finish. Polishes glass to a brilliant shine. Restores shine to tarnished finishes. Adds lustre and protects lead, brass, chrome, copper, raw solder and most patina finishes.

12 oz (354 ml) bottle with convenient flip cap for easy application.

TRIED, TEST AND TRUE! - PROBABLY THE BEST FINISHING COMPOUND ON THE MARKET!

Stained Glass Finishing Compound 12oz

Stained Glass Finishing Compound is a must for your copper foil projects! This 100% Carnuba wax product ensures a bright, even, durable finish on raw solder and solder seams treated with patina. It polishes and protects against tarnish for professional results. It also cleans and waxes the glass to a high shine. Also known as Kem-o-Pro, no soldered project is complete without the final shine of Stained Glass Finishing Compound.

The Patina Buddy is the perfect prep. for applying patina. Use to enhance the results of your projects. Easy to use. Apply Neutra cleaner and scrub project well.