- CLOSE-OUTS (SALES)
- BARGAIN BIN
- BEADMAKING & FLAMEWORKING
- ACCESSORIES AND FINDINGS
- BEADHOPPERS
- BEADMAKING CHEMICALS & CONSUMABLES
- BORO BATCH GLASS
- BOROGLOW TUBING
- BOROSILICATE GLASS DECALS by HENDRIXSON
- BULLSEYE GLASS - COE 90
- CHINESE GLASS
- CLEAR BOROSILICATE TUBING & ROD
- COMPETTITIVE GLASSWORKS
- CREATION IS MESSY (CiM) GLASS
- CRUSHED OPAL TUBING & RODS
- DICHROIC FRIT
- DICHROIC GLASS
- DICRO SLIDE
- DOUBLE HELIX GLASS
- DREAM TUBING CO. - DICHROIC BORO TUBING
- DREAM TUBING CO. - DICHROIC BORO CANE
- EFFETRE GLASS
- FAIRY DUST - SIMULATED DICHROIC
- FRIT BLENDS - SOFT GLASS
- FUMING
- GILSON & DOPALS OPALS
- GLASKOLBEN
- GLASS ALCHEMY GLASS
- GLOW POWDER
- GOLDSTONE & AVENTURINE
- GREASY GLASS
- GROUND GLASS JOINTS
- ACCUGRIND GROUND GLASS JOINTS
- CHINESE CLEAR GROUND JOINTS
- CHINESE COLOUR GROUND JOINTS
- DIFFUSERS
- GERMAN GROUND GLASS JOINTS
- KECK CLIPS
- LENZ GROUND GLASS JOINTS
- QUARTZ GROUND GLASS JOINTS
- THREADED GLASS VIALS
- UNGROUND GLASS JOINTS
- 10mm GROUND GLASS JOINTS
- 12mm GROUND GLASS JOINTS
- 14mm GROUND GLASS JOINTS
- 19mm GROUND GLASS JOINTS
- DEWAR GROUND GLASS JOINTS
- HEAT DEFENSE PADS
- HIGH TEMPERATURE TAPES & ADHESIVES
- KILN MATS - WOVEN
- KUGLER GLASS - 104 COE
- LAMPWORKING KILNS
- LAUSCHA GLASS
- LEAF, FOILS, TUBING, DISCS, WIRE & GRAIN, INSERTS
- LINED TUBING by BESPOKE GLASS
- LUMIERE LUSTERS™
- MICA POWDERS
- MILLEFIORI
- MOMKA GLASS
- MURRINI - GALAXY
- NORTHSTAR GLASS
- OCEANSIDE GLASS & SYSTEM 96 RODS
- ORIGIN GLASS
- PARRAMORE GLASS
- PDX TUBING
- QUARTZ ROD & TUBING
- REDUCTION FRIT
- REDUCTION RODS
- REICHENBACH 104 GLASS
- SAFETY SUPPLIES - EYEWARE, GLOVES, ETC.
- SAMPLE SETS
- STREAKY STRINGERS AND RODS
- THOMPSON ENAMELS
- TAG - TRAUTMAN ART GLASS
- TOOLS - LAMPWORKING
- BEAD CREATORS
- BEAD & MARBLE MOLDS
- BENCH ROLLERS
- BLOWHOSE ADAPTORS (BOOTS)
- BLOWHOSE, SWIVELS, STOPPERS, CORKS
- BLOWPIPES
- CARBON RODS
- CLEANING TOOLS
- CUTTING & SCORING TOOLS
- DESIGN PUSHES
- FINISHING TONGS
- FLARING TOOLS
- FRIT TRAYS, FRIT SIFTERS, FRIT MAKERS
- GRAPHITE PADS
- GROUND GLASS JOINT TOOLS
- HEMOSTATS
- HOLDING FINGERS - GRABBERS
- IMPLOSION TOOLS
- JACKS
- LATHE TOOLS
- MANDRELS
- MARBLE MOLDS
- MASHING TOOLS
- OPTIC MOLDS
- MEASURING & MARKING TOOLS
- PADDLES
- NECKING TOOLS
- PUSHES
- RAKING & POKING TOOLS
- REAMERS
- REPLACEMENT PARTS
- SHAPING TOOLS
- SHEARS
- SOPHIETA or PUFFER TOOLS
- SCULPTING TOOLS
- TWEEZERS & HOLDING TOOLS
- TORCHES, BURNERS AND ACCESSORIES
- BEVELS
- BEVEL CLUSTERS
- EXQUISITE BEVEL CLUSTERS
- GLASSMATE NATURE SERIES
- GST (GLASSMITH) - CLEAR
- GST (GLASSMITH) - COLOURED
- HARMONY BEVELS
- INFINITY BEVEL CLUSTERS
- ANGEL BEVEL CLUSTERS
- ANIMAL BEVEL CLUSTERS
- ASTROLOGY BEVEL CLUSTERS
- BIRD BEVEL CLUSTERS
- CELTIC BEVEL CLUSTERS
- CORNER & BORDER BEVEL CLUSTERS
- FLORAL BEVEL CLUSTERS
- HEART & RIBBON BEVEL CLUSTERS
- HOLIDAY AND OTHER MISC. THEMED BEVEL CLUSTERS
- MUSICAL BEVEL CLUSTERS
- NAUTICAL BEVEL CLUSTERS
- PRIARIE BEVEL CLUSTERS
- PROFESSIONAL BEVEL CLUSTERS
- RELIGIOUS BEVEL CLUSTERS
- STAR BEVEL CLUSTERS
- BOOKS & PATTERNS
- STAINED GLASS PATTERN BOOKS A - D
- STAINED GLASS PATTERN BOOKS E - I
- STAINED GLASS PATTERN BOOKS J - K
- STAINED GLASS PATTERN BOOKS L - Q
- STAINED GLASS PATTERN BOOKS R - S
- STAINED GLASS PATTERN BOOKS T - Z
- ETCHING
- FUSING
- HOLIDAY & RELIGIOUS
- INSTRUCTIONAL & REFERENCE BOOKS
- LAMPS
- LAMPWORKING & JEWELLERY
- MOSAIC & GARDEN
- NATURE & ANIMALS
- PAINTING
- PROJECTS
- STYLES & THEMES
- WINDOWS & DOORS
- CAME, FOIL, METALS
- CHEMICALS
- FRAMING
- FUSING
- ACCESSORIES & FINDINGS
- ADHESIVES
- BULLSEYE GLASS
- CHEMICALS AND CONSUMABLES
- DICHROIC GLASS
- DISPLAY STANDS & WALL MOUNTS
- FRIT BLENDS - 96COE
- FUSIBLE PAPER & DECALS
- FUSING GLASS PACKS
- FUSING KITS
- FUSING MOLDS
- BOTTLE SLUMPING MOLDS
- CASTING MOLDS - COLOUR DE VERRE
- CASTING MOLDS - CPI (CREATIVE PARADISE)
- CASTING RINGS
- DOOR KNOB MOLDS & HARDWARE
- DROP, DRAPE and SLUMP MOLDS
- LAMP MOLDS
- NOVELTY MOLDS
- OVAL MOLDS
- POT MELT MOLDS
- RECTANGULAR MOLDS
- RELIGIOUS THEMED MOLDS
- ROUND MOLDS
- STAINLESS STEEL MOLDS
- STAND-UP MOLDS
- SQUARE MOLDS
- TEXTURE MOLDS
- WEAVE MOLDS
- FUSING TOOLS
- GLOW FRIT (FUSING)
- GLASSLINE PAINTS
- KILNS & ACCESSORIES
- KILN MATS - WOVEN
- MICA POWDERS & FAIRY DUST (SIMULATED DICHROIC)
- MILLEFIORI & MURRINE
- OCEANSIDE COMPATIBLE & SYSTEM 96 GLASS
- OVERLAYS for FUSED & STAINED GLASS
- PRE CUT FUSIBLE GLASS SHAPES
- SAFETY SUPPLIES - EYEWARE, GLOVES, ETC.
- THOMPSON ENAMELS
- TWISTED CANE
- WALL MOUNTING SYSTEMS
- WISSMACH 96 FRITS
- GLASS SHEETS - FUSIBLE
- GLASS SHEETS - NON FUSIBLE
- GRINDERS, BANDSAWS, CAME SAWS
- HAND TOOLS
- JEWELRY
- JEWELS, GLOBS, RONDELS
- LAMP BASES & ACCESSORIES
- MERCHANDISE
- MOSAIC & PATIO STONE
- PAINTING
- STAINED GLASS BEGINNER KITS
- SUNDRIES
MADHATTER GLASSWORKS TOOLS
Sort by:Recommended
MICRO BURNER by MADHATTER
NOTE: BLACK COLOUR ONLY RIGHT NOW
The smallest bunsen burner available! A CNC machined billet aluminum body and all brass burner parts make this durable little burner a winner in your shop. At less than 2 inches tall and 1-1/4" diameter you won't find a smaller, more capable bunsen burner. A powerful neo magnet holds the micro in place on steel surfaces or use the 8-32 tapped hole to mount to bracket or base of your choice. Adjustable air flow sleeve allows a soft orange candle flame up to a pointed feathery blue flame up to 6" high. **NOT COMPATIBLE WITH STABILIZER INSERTS**
Operates best at propane pressures less than 5psi and with low flow rates, it requires a needle valve to moderate the flame.MICRO BURNER PLUS by MADHATTER
SAME AS ABOVE MICRO BURNER ONLY WITH ADJUSTABLE AIR FLOW CONTROL NOZZLES
The smallest bunsen burner available! A CNC machined billet aluminum body and all brass burner parts make this durable little burner a winner in your shop. At less than 2 inches tall and 1-1/4" diameter you won't find a smaller, more capable bunsen burner. A powerful neo magnet holds the micro in place on steel surfaces or use the 8-32 tapped hole to mount to bracket or base of your choice. Adjustable air flow sleeve allows a soft orange candle flame up to a pointed feathery blue flame up to 6" high. **NOT COMPATIBLE WITH STABILIZER INSERTS**
FLEXBURNER - FB3
The original and only multi position bunsen burner available! - NOTE: COLOUR MAY VARY FROM PHOTO DEPENDANT UPON STOCK AVAILABILITY - COLOUR CHOICE IS OURS WHEN SHIPPING
CNC machined billet aluminum body with four rotating burner tips allows huge flexibility in the heat distribution on the workpiece. The body has FOUR powerful neodymium magnets concealed in the base making the Flexburner extremely compact such a large flame coverage! The bottom is also threaded for screw attachment to a Flexmount or bracket.
The Madhatter Flexburner has four burner nozzles that each swivel up to 20 degrees and stay in position. This allows the artist to customize the heat pattern of the burner from concentrated center fire to a wide “crown flame” and everything in between.
The FB3 nozzles have ADJUSTABLE AIR FLOW CONTROL on each nozzle. The flame is stable at propane pressures from 2 to 10psi but must be throttle controlled above 3psi with a needle valve which is SOLD SEPARATELY.
FLEXBURNER - XL
Only 4 left in stockWe took the Flexburner swiveling flame nozzles to a new length and shape. The FlexburnerXL is a ribbon style burner with three pairs of nozzles allowing for a longer, more linear heat distribution pattern than the Standard Flexburner. Perfect for long work such as preheating tube for sleeving/blow in work or vac stacks!
CNC machined billet aluminum body with six rotating burner tips allows huge flexibility in the heat distribution on the workpiece. Overall dimensions are 5.5”L x 2.7”W x 3.4”H. Includes one barb fitting and two plugs. NOTE: COLOUR MAY VARY FROM PHOTO DEPENDANT UPON STOCK AVAILABILITY - COLOUR CHOICE IS OURS WHEN SHIPPINGThe nozzles can move independently but they do NOT have individual flame size or chemistry adjustment, all burners are controlled by a single input valve which is sold separately. The flame is stable at propane pressures from 2 to 10psi.
Each FlexburnerXL has three input ports, one on each end and one on the side. This allows you to connect multiple burners in line for very long work or side-by-side for a very wide and strong flame bed.The flame on all burners can controlled by a single input valve which is sold separately, but is NOT necessary to operate the burner unless you wish to control the input volume to adjust the flame.
FLEXBURNER - XL PLUS
The PLUS nozzles have an ADJUSTABLE AIR FLOW CONTROL on each nozzle. The flame is stable at propane pressures from 2 to 10psi but must be throttle controlled above 4psi with a needle valve which is SOLD SEPARATELY.
CNC machined billet aluminum body with six rotating burner tips allows huge flexibility in the heat distribution on the workpiece. Overall dimensions are 5.5”L x 2.7”W x 3.4”H. Includes one barb fitting and two plugs. NOTE: COLOUR MAY VARY FROM PHOTO DEPENDANT UPON STOCK AVAILABILITY - COLOUR CHOICE IS OURS WHEN SHIPPINGNOTE: SPECIAL ORDER ITEM - ALLOW ABOUT 1 WEEK TO GET IN AND SHIP OUT
MADHATTER NEEDLE VALVE
Brass needle valve with adapter tubes for 1/4” hose.
Use this valve to control the flow of fuel (propane) to the Flexburner. This is NOT a pressure regulator, it allows fine control of the size of the Flexburner flame.MADHATTER SPLITTER, 3-PORT "Y"
This 3 port splitter is commonly known as a “Y” connector. You are no longer confined to the available connector ends of common brass Y connectors! We have reimagined the splitter as a user configurable manifold, CNC machined from solid billet aluminum with a satin anodized finish.
Each splitter has three 1/4”NPT ports to accept barb and “B” style connectors which are SOLD SEPARATELY. Add the connector style of your choice for each port! Common use for a splitter like this is to add a single line extension to a gas hose for connecting a bunsen burner or to share compressed air to multiple devices.
1.70” diam x .75” longMADHATTER MANIFOLD, 6-PORT
Only 2 left in stockThe 6 port manifold is a dual plane Y style splitter CNC machined from solid billet aluminum with a satin anodized finish. Much smaller than our 14 port manifold used to add a lathe to your glassworking shop. Each 6 port manifild body has six 1/4”NPT ports to accomodate brass fittings with either barb or “B” style configurations SOLD SEPARATELY.
These are commonly used by glass artists to upgrade the workspace by adding a hand/mini torch to the standard bench torch! This manifold is also used to upgrade a single stage torch to dual stage or for upgrading from dual to three stage torches. These smaller manifolds in combo with 3 port splitters can be used with oxygen concentrators as a clean way to combine multiple output hoses to a single line supplying a compressor or straight to a torch.
1.70” diameter x 1.60” longMADHATTER MANIFOLD, 6-PORT SP
Only 1 left in stockThis six port single plane manifold is for distribution of ONE GAS ONLY. Perfect for connecting multiple Oxygen Concentrators to a single line or sending Propane to multiple bunsen burners.
Billet aluminum is 6"L X 1.4"W X 1.4"H and weighs 1 lb [152mm X 36mm X 36mm @ 460g]
ALL PORTS ARE 1/4" NPT >>>YOU WILL NEED BRASS FITTINGS TO CONNECT YOUR LINES, SOLD SEPARATELY
It has two screw mounting holes in the body and includes screws and steel plugs for unused ports.
MANIFOLD - 11 PORT
This is a gas distribution manifold specifically designed for the professional glassblower. CNC machined from billet aluminum, this manifold has two independent paths for fuel (propane) and oxygen. Connect the supply tanks to one set of ports and connect up to FOUR torches to the compact manifold plus ONE EXTRA BONUS PORT for a bunsen burner on the top of the manifold.
SIZE: 4.5”L X 1.4”W X 2.9”T - Mounting holes are 2” apart and includes 2 screws.
Manifold IS NOT adjustable for different flow rates or pressures to each torch.
MANIFOLD - 14 PORT - V2
This is a gas distribution manifold specifically designed for the professional glassblower. CNC machined from billet aluminum, this manifold has two independent paths for gas (propane) and oxygen. Connect the supply tanks to one set of ports and connect up to FIVE torches to the compact manifold plus TWO EXTRA BONUS PORTS for bunsen burners on the back of the manifold.
SIZE: 6”L X 1.4”W X 2.9”T - Mounting holes are 2” apart and includes 2 screws
Manifold IS NOT adjustable for different flow rates or pressures to each torch.
MANIFOLD BRACKET by MADHATTER
Stainless steel bracket to mount 11 port and 14 port manifolds vertically. Includes hardware: two flat head screws with lock washers and nuts, plus two all purpose screws to attach bracket to wood surface.
Manifold sold separatelyTREE PERC JIG - 6 HOLE by MADHATTER GLASSWORKS
Only 10 left in stockAnodized aluminum jig for producing tree percolators for rigs and bongs. CNC machined from billet aluminum with a smooth satin anodized finish. These jigs include a brass thumbscrew to securely hold the 12.7mm (12mm works as well) center blow tube in place as well as a loop spring to hold the tree arm tubes in position while you weld them to the center tube. The angled waist combines with the loop spring to make these jigs FAST AND EASY to load and assemble! Simply press the arm tubes into the holes and it pushes the spring down and then snaps back into position when the tube is at bottom. When complete just loosen the side screw and push the tree out! No clamps or wires required.
These jigs allow for wire or narrow hose clamps if you prefer them.
The six hole jigs are sized to allow 6 x 9.5mm (10 x 2.2 works as well) arm tubes to fit into MINIMUM 44mm heavy wall tubing. It will also hold 8mm tubes on the armsFLAME STABILIZER INSERT by MADHATTER
This small insert makes a HUGE difference in the Flexburner flame! Replacing the standard nozzle screen with the Stabilizer Insert produces a hotter blue flame with a tighter shape for more heat right where you need it. More efficient combustion results in a less reducing chemistry as well.
No tools required for installation, simply pop out the screen and press the insert into the nozzle! Works on all Flexburners and Flexburner XL'sMAGNET BASE by MADHATTER
This is the magnet used on the base of Gen 1 Flexburners and on the Flexmount. Approximately 2-1/2” diameter and 5/16” thick. The metal cover accepts a 1/4” screw which is included.