CARLISLE TORCHES

Carlisle Mini CC Bench Burner - (Torch)

The Carlisle Mini CC is a totally surface mixed burner that offers a high level of versatility in the flame. This wide range of flame capabilities makes the Mini CC the perfect bench burner for beginners and experts alike.

There are two versions of the Mini CC. The High Oxygen Bench Burner is suited for use with both hard and soft glass. It has been designed for increased productivity, attainable through higher flame temperatures and increased flow capabilities of gases. The second option, is the Pinpoint Bench Burner which produces a sharper, narrow flame with a longer focal length and superior "piercing" capabilities.

The body of the mini CC is constructed of brass and has cooling fins cut into its profile to help protect the burner from heat build-up. The tube matrix, which is constructed of seven tubes, is made of stainless steel. The stand itself is designed for ease of use and places the burner head at a 45° angle. The connection of the body to the stand is made with a ball joint, allowing for an increased or decreased tilt of 15° and articulation. This allows the burner to have excellent positioning capabilities. The base also has four rubber feet to reduce the likelihood of the unit from sliding during use and features two mounting holes for permanent installations.

Consumption based on standard usage is approximately 1.5 LPM (Liters Per Minute) of propane and 7 LPM of oxygen. This burner may be used with oxygen and either natural gas, propane, or even hydrogen. The recommended operating pressures are 2 PSI (Pounds per Square Inch) for fuel gas and 5 PSI for oxygen.         

Please Note:
The price shown in Canadian dollars is the retail price from the USA, converted to CAD with no additional markups.
What does this mean for you? You save!!
1) NO expensive shipping from the USA, which you have to pay in USD.
2) NO additional brokerage fees.
3) NO taxes at the border.
4) NO additional bank fees for having to pay in USD.

Carlisle Wildcat Bench Burner - (Torch)

The WildCat Bench Burner is a totally surface mixed burner that offers a powerful flame that remains gentle enough to use with coloured glass and dichroic glass. The wider flame produced by the WildCat allows for solid borosilicate work up to 1 1/2" thick and solid soft glass work up to 2" thick.

Named after the rugged World War II fighter plane of the same name, the WildCat features a solid brass body construction with a stainless steel tube matrix. The tube matrix features 19 fuel ports surrounded by ample oxygen porting. The stand itself is designed for ease of use and places the burner head at a 45° angle. The connection of the body to the stand is made with a ball joint, allowing for an increased or decreased tilt of 15° to articulate the head in virtually any direction or rotation. This allows the burner to have excellent positioning capabilities. The base also has four rubber feet to reduce the likelihood of the unit from sliding during use and features two mounting holes for permanent installations.

An innovative feature of this burner is the "Vortex" cooling system, built into the brass casing. With 12 ports cut into the front of the casing, this highly effective cooling system uses oxygen from the burner to pull air through the casing, causing the burner to release much of the heat that builds in the casing. As the operator pushes the flame to higher levels, the cooling feature also amplifies its effectiveness as the oxygen flow increases.

Fuel gas and oxygen consumption for the WildCat is extremely economical, with a standard usage of approximately 3 LPM (Liters Per Minute) of propane and only 15 LPM of oxygen. This burner may be used with oxygen and either natural gas, propane, or even hydrogen. The recommended operating pressures are 2 PSI (Pounds per Square Inch) for fuel gas and 5 PSI for oxygen

Please Note:
The price shown in Canadian dollars is the retail price from the USA, converted to CAD with no additional markups.
What does this mean for you? You save!!
1) NO expensive shipping from the USA, which you have to pay in USD.
2) NO additional brokerage fees.
3) NO taxes at the border.
4) NO additional bank fees for having to pay in USD.

Carlisle Hellcat Bench Burner - (Torch)

 The Carlisle Hellcat is a totally surface mixed 4 inlet burner that offers a high level of versatility in the flame. This wide range of flame capabilities makes the Hellcat the perfect bench burner for beginners and experts alike.

The Hellcat Bench Burner is suited for use with both hard and soft glass. It has been designed for increased productivity, attainable through higher flame temperatures and increased flow capabilities of gases. The center fire of the Hellcat is exactly the same as the Mini CC, Seven tubes, then using the outer two adjusting knobs you enable 14 more tubes to give you a much broader range of heat to work with.

The body of the Hellcat is constructed of brass and has a stainless steel nose cone to help the torch run cooler and prevent heat build-up. The tube matrix, which is constructed of seven tubes in the center and 14 tubes on the outer fire, is made of stainless steel. The stand itself is designed for ease of use and places the burner head at a 45° angle. The connection of the body to the stand is made with a ball joint, allowing for an increased or decreased tilt of 15° and articulation. This allows the burner to have excellent positioning capabilities. The base also has four rubber feet to reduce the likelihood of the unit from sliding during use and features two mounting holes for permanent installations, the same as the Mini CC.

Consumption based on standard usage is approximately 1.5 LPM (Liters Per Minute) of propane and 7 LPM of oxygen on the center fire only. With both inner and outer fires, 4.5 LPM of propane and 21 LPM of oxygen. This burner may be used with oxygen and either natural gas, propane, or even hydrogen. The recommended operating pressures are 2-3 PSI (Pounds per Square Inch) for fuel gas and 5 PSI for oxygen. 

Please Note:
The price shown in Canadian dollars is the retail price from the USA, converted to CAD with no additional markups.
What does this mean for you? You save!!
1) NO expensive shipping from the USA, which you have to pay in USD.
2) NO additional brokerage fees.
3) NO taxes at the border.
4) NO additional bank fees for having to pay in USD.

Carlisle CC Bench Burner (Torch), 2 Inlet, Ball & Post Mount, #3 Center Fire.

The Carlisle CC Burner is known as a cannon style burner . Its large outer case and tremendous flame output resembles the profile of a "cannon". This burner may be used with a mixture of oxygen and either natural gas, propane, or hydrogen (different tips are suggested depending on the gas used).

This burner produces two distinctive flames, the centerfire (pre-mixed) and the outer fire                                                           (surface mixed). The centerfire, which has characteristics of a single ported tip, produces a flame similar to what may be achieved with a Carlisle hand torch.

There are three types of centerfire tips available. The #5 tip has the largest orifice of the piloted centerfire tips, this produces more BTU's than the smaller #3 tip. The #3 centerfire tip produces a smaller, more defined flame. The last type is the hydrogen tip which is for use with hydrogen gas, it is unpiloted, and has the same orifice size as the #5 tip.  
Though the hydrogen tip can be used with all gases, best results are achieved with hydrogen.                        
Note: The #3 and #5 tips are piloted and will be damaged if used with hydrogen.

The outer shell of the CC body is manufactured from brass.
The brass shell is threaded onto a machined brass body. For fuel gas supply, four metering valves are attached to the back of the body. These valves are colour coded for ease of use. The oxygen valves have green handles while the gas valves have red handles. On a standard CC these valves are interconnected by crossover attachments to limit the feed hose requirements to two. The CC burner is also available with four separate inlets to allow for the use of foot controllers. The standard hose connections on the CC are welding hose "B fittings". 

There are several styles of bases available for the CC. The standard style is a Ball and Post mount. The Ball and Post base utilizes a crescent shaped solid steel base with a ball and socket connection. The post that extends upward is threaded directly into the bottom of the CC body. This style offers a selective articulation. In order to adjust the angle of the head, the user releases a thumb screw at the base of the post. When re-tightened, this provides positive burner positioning. The Rack and Pinion style mount utilizes a pinion gear to pivot the burner in an arc, offering greater range of positioning than the Ball and Post mount. The user can adjust a knob on the side of the mounting device for quick, accurate positioning. Custom lathe mounts are also available as an option. 

Please Note:
The price shown in Canadian dollars is the retail price from the USA, converted to CAD with no additional markups.
What does this mean for you? You save!!
1) NO expensive shipping from the USA, which you have to pay in USD.
2) NO additional brokerage fees.
3) NO taxes at the border.
4) NO additional bank fees for having to pay in USD.

Carlisle CC Bench Burner (Torch), 2 Inlet, Ball & Post Mount, #5 Center Fire.

The Carlisle CC Burner is known as a cannon style burner . Its large outer case and tremendous flame output resembles the profile of a "cannon". This burner may be used with a mixture of oxygen and either natural gas, propane, or hydrogen (different tips are suggested depending on the gas used).

This burner produces two distinctive flames, the centerfire (pre-mixed) and the outer fire                                                           (surface mixed). The centerfire, which has characteristics of a single ported tip, produces a flame similar to what may be achieved with a Carlisle hand torch.

There are three types of centerfire tips available. The #5 tip has the largest orifice of the piloted centerfire tips, this produces more BTU's than the smaller #3 tip. The #3 centerfire tip produces a smaller, more defined flame. The last type is the hydrogen tip which is for use with hydrogen gas, it is unpiloted, and has the same orifice size as the #5 tip.  
Though the hydrogen tip can be used with all gases, best results are achieved with hydrogen.                        
Note: The #3 and #5 tips are piloted and will be damaged if used with hydrogen.

The outer shell of the CC body is manufactured from brass.
The brass shell is threaded onto a machined brass body. For fuel gas supply, four metering valves are attached to the back of the body. These valves are colour coded for ease of use. The oxygen valves have green handles while the gas valves have red handles. On a standard CC these valves are interconnected by crossover attachments to limit the feed hose requirements to two. The CC burner is also available with four separate inlets to allow for the use of foot controllers. The standard hose connections on the CC are welding hose "B fittings". 

There are several styles of bases available for the CC. The standard style is a Ball and Post mount. The Ball and Post base utilizes a crescent shaped solid steel base with a ball and socket connection. The post that extends upward is threaded directly into the bottom of the CC body. This style offers a selective articulation. In order to adjust the angle of the head, the user releases a thumb screw at the base of the post. When re-tightened, this provides positive burner positioning. The Rack and Pinion style mount utilizes a pinion gear to pivot the burner in an arc, offering greater range of positioning than the Ball and Post mount. The user can adjust a knob on the side of the mounting device for quick, accurate positioning. Custom lathe mounts are also available as an option. 

Please Note:
The price shown in Canadian dollars is the retail price from the USA, converted to CAD with no additional markups.
What does this mean for you? You save!!
1) NO expensive shipping from the USA, which you have to pay in USD.
2) NO additional brokerage fees.
3) NO taxes at the border.
4) NO additional bank fees for having to pay in USD.

Carlisle CC Bench Burner (Torch), 4 Inlet, Ball & Post Mount, #3 Center Fire.

The Carlisle CC Burner is known as a cannon style burner . Its large outer case and tremendous flame output resembles the profile of a "cannon". This burner may be used with a mixture of oxygen and either natural gas, propane, or hydrogen (different tips are suggested depending on the gas used).

This burner produces two distinctive flames, the centerfire (pre-mixed) and the outer fire                                                           (surface mixed). The centerfire, which has characteristics of a single ported tip, produces a flame similar to what may be achieved with a Carlisle hand torch.

There are three types of centerfire tips available. The #5 tip has the largest orifice of the piloted centerfire tips, this produces more BTU's than the smaller #3 tip. The #3 centerfire tip produces a smaller, more defined flame. The last type is the hydrogen tip which is for use with hydrogen gas, it is unpiloted, and has the same orifice size as the #5 tip.  
Though the hydrogen tip can be used with all gases, best results are achieved with hydrogen.                        
Note: The #3 and #5 tips are piloted and will be damaged if used with hydrogen.

The outer shell of the CC body is manufactured from brass.
The brass shell is threaded onto a machined brass body. For fuel gas supply, four metering valves are attached to the back of the body. These valves are colour coded for ease of use. The oxygen valves have green handles while the gas valves have red handles. On a standard CC these valves are interconnected by crossover attachments to limit the feed hose requirements to two. The CC burner is also available with four separate inlets to allow for the use of foot controllers. The standard hose connections on the CC are welding hose "B fittings". 

There are several styles of bases available for the CC. The standard style is a Ball and Post mount. The Ball and Post base utilizes a crescent shaped solid steel base with a ball and socket connection. The post that extends upward is threaded directly into the bottom of the CC body. This style offers a selective articulation. In order to adjust the angle of the head, the user releases a thumb screw at the base of the post. When re-tightened, this provides positive burner positioning. The Rack and Pinion style mount utilizes a pinion gear to pivot the burner in an arc, offering greater range of positioning than the Ball and Post mount. The user can adjust a knob on the side of the mounting device for quick, accurate positioning. Custom lathe mounts are also available as an option. 

Please Note:
The price shown in Canadian dollars is the retail price from the USA, converted to CAD with no additional markups.
What does this mean for you? You save!!
1) NO expensive shipping from the USA, which you have to pay in USD.
2) NO additional brokerage fees.
3) NO taxes at the border.
4) NO additional bank fees for having to pay in USD.

Carlisle CC Bench Burner (Torch), 4 Inlet, Ball & Post Mount, #5 Center Fire.

The Carlisle CC Burner is known as a cannon style burner . Its large outer case and tremendous flame output resembles the profile of a "cannon". This burner may be used with a mixture of oxygen and either natural gas, propane, or hydrogen (different tips are suggested depending on the gas used).

This burner produces two distinctive flames, the centerfire (pre-mixed) and the outer fire                                                           (surface mixed). The centerfire, which has characteristics of a single ported tip, produces a flame similar to what may be achieved with a Carlisle hand torch.

There are three types of centerfire tips available. The #5 tip has the largest orifice of the piloted centerfire tips, this produces more BTU's than the smaller #3 tip. The #3 centerfire tip produces a smaller, more defined flame. The last type is the hydrogen tip which is for use with hydrogen gas, it is unpiloted, and has the same orifice size as the #5 tip.  
Though the hydrogen tip can be used with all gases, best results are achieved with hydrogen.                        
Note: The #3 and #5 tips are piloted and will be damaged if used with hydrogen.

The outer shell of the CC body is manufactured from brass.
The brass shell is threaded onto a machined brass body. For fuel gas supply, four metering valves are attached to the back of the body. These valves are colour coded for ease of use. The oxygen valves have green handles while the gas valves have red handles. On a standard CC these valves are interconnected by crossover attachments to limit the feed hose requirements to two. The CC burner is also available with four separate inlets to allow for the use of foot controllers. The standard hose connections on the CC are welding hose "B fittings". 

There are several styles of bases available for the CC. The standard style is a Ball and Post mount. The Ball and Post base utilizes a crescent shaped solid steel base with a ball and socket connection. The post that extends upward is threaded directly into the bottom of the CC body. This style offers a selective articulation. In order to adjust the angle of the head, the user releases a thumb screw at the base of the post. When re-tightened, this provides positive burner positioning. The Rack and Pinion style mount utilizes a pinion gear to pivot the burner in an arc, offering greater range of positioning than the Ball and Post mount. The user can adjust a knob on the side of the mounting device for quick, accurate positioning. Custom lathe mounts are also available as an option. 

Please Note:
The price shown in Canadian dollars is the retail price from the USA, converted to CAD with no additional markups.
What does this mean for you? You save!!
1) NO expensive shipping from the USA, which you have to pay in USD.
2) NO additional brokerage fees.
3) NO taxes at the border.
4) NO additional bank fees for having to pay in USD.

Carlisle CC Bench Burner (Torch), 2 Inlet, Rack # Pinion Mount, #3 Center Fire.

The Carlisle CC Burner is known as a cannon style burner . Its large outer case and tremendous flame output resembles the profile of a "cannon". This burner may be used with a mixture of oxygen and either natural gas, propane, or hydrogen (different tips are suggested depending on the gas used).

This burner produces two distinctive flames, the centerfire (pre-mixed) and the outer fire                                                           (surface mixed). The centerfire, which has characteristics of a single ported tip, produces a flame similar to what may be achieved with a Carlisle hand torch.

There are three types of centerfire tips available. The #5 tip has the largest orifice of the piloted centerfire tips, this produces more BTU's than the smaller #3 tip. The #3 centerfire tip produces a smaller, more defined flame. The last type is the hydrogen tip which is for use with hydrogen gas, it is unpiloted, and has the same orifice size as the #5 tip.  
Though the hydrogen tip can be used with all gases, best results are achieved with hydrogen.                        
Note: The #3 and #5 tips are piloted and will be damaged if used with hydrogen.

The outer shell of the CC body is manufactured from brass.
The brass shell is threaded onto a machined brass body. For fuel gas supply, four metering valves are attached to the back of the body. These valves are colour coded for ease of use. The oxygen valves have green handles while the gas valves have red handles. On a standard CC these valves are interconnected by crossover attachments to limit the feed hose requirements to two. The CC burner is also available with four separate inlets to allow for the use of foot controllers. The standard hose connections on the CC are welding hose "B fittings". 

There are several styles of bases available for the CC. The standard style is a Ball and Post mount. The Ball and Post base utilizes a crescent shaped solid steel base with a ball and socket connection. The post that extends upward is threaded directly into the bottom of the CC body. This style offers a selective articulation. In order to adjust the angle of the head, the user releases a thumb screw at the base of the post. When re-tightened, this provides positive burner positioning. The Rack and Pinion style mount utilizes a pinion gear to pivot the burner in an arc, offering greater range of positioning than the Ball and Post mount. The user can adjust a knob on the side of the mounting device for quick, accurate positioning. Custom lathe mounts are also available as an option. 

Please Note:
The price shown in Canadian dollars is the retail price from the USA, converted to CAD with no additional markups.
What does this mean for you? You save!!
1) NO expensive shipping from the USA, which you have to pay in USD.
2) NO additional brokerage fees.
3) NO taxes at the border.
4) NO additional bank fees for having to pay in USD.

The Hose Set for 4 Port Torches allows you to attach a single set of hoses to any burner with 4 ports, and consists of 2, 18” long, 1/4” T-grade, oxygen hoses and 2, 18” long, 1/4” T-grade, gas hoses with "B" fittings on one end, clean cut on the other end, and 1 brass oxygen Y connector and 1 brass gas Y connector. Also included is a set of adaptor couplers to attach the "Y" connectors to your existing hose set, and four clamps to attach to the burner.

The Hose Set for 4 Port Torches allows you to attach a single set of hoses to any burner with 4 ports, and consists of 2, 18” long, 1/4” T-grade, oxygen hoses and 2, 18” long, 1/4” T-grade, gas hoses with "B" fittings on both ends, and 1 brass oxygen Y connector and 1 brass gas Y connector. Also included is a set of adaptor couplers to attach the "Y" connectors to your existing hose set.