BETHLEHEM TORCHES

The new low-pressure, stainless steel, Alpha Glass Bead Burner. The Alpha delivers more flow at a low gas pressure producing the ideal glass working flame. It’s an excellent starter burner for the glass bead artist. Affordable and convenient, the Alpha is the only torch on the market today designed with your needs in mind.

Do you work at home with low-pressure household natural gas? If so, the Alpha would be a dream-come true!

The Star Burner was designed for the modern flame worker. The stainless-steel construction keeps the torch barrel cool to the touch and the low velocity flame reduces fuel waste while increasing the torches fuel mixture range. The Star torch is the perfect torch for flame workers of all skill levels and for use with oxygen concentrators. Produces a lot more heat while still allowing the use of an oxygen concentrator.

The surface-mix flame produces gentle, yet penetrating flames that range from a gentle pinpoint, perfect for fine detail stringer work, all the way up to a 2" wide bushy flame ideal for evenly soaking large amounts of glass!

6 center gas jets inside a star shaped oxygen chamber, 5 outer fire gas jets surrounded by 15 additional oxygen ports

Face diameter - .75"

Full flame consumption:
Propane Gas: 2 psi - 5 psi, 5 LPM
Tanked Oxygen: 8 psi - 20 psi, 20 LPM

Works:
Boro Rod - 7/8" (22 mm)
Tube - 36mm Heavy Walled Tube

The new low-pressure, stainless steel Bravo Bench Burner was designed specifically with the needs of the artistic flameworker in mind. A dual-purpose torch, it will work easily with both soft and borosilicate glass.

The two part holder is adjustable for both height and burner angle.

Note: If you want to connect your gas and oxygen lines to one main hose, you will need a set of Y connectors to connect the four lines from the burner to one main twin hose.

The Bravo Sharp Flame is the latest Bethlehem Burners torch to include our new Sharp Flame centerfire design! This stainless steel, surface mix, glass working torch was designed for glass artists looking for an artistic style burner that’s also durable and user friendly. From the sharp flame centerfire to the infinite mid-flame range of the outer fire, the Bravo Sharp Flame produces every flame setting and fuel-mixture ratio a glass artist could wish for. Limited Release

All Bravo Sharp Flame torches come equipped with the new Bethlehem swivel base along with our modular, stainless-steel, precision needle valves.

Note: If you want to connect your gas and oxygen lines to one main hose, you will need a set of Y connectors to connect the four lines from the burner to one main twin hose.

The Bethlehem Champion Burner is the replacement for the popular PM2D W/C Bench Burner Torch. Like the PM2D, the Champion is an all surface-mix duel-flame torch with separately controlled center and outer fires. Click on details for information as supplied by Bethlehem.

The Champion Sharp Flame is the same torch as the original Champion, but it comes with Bethlehem's new sharp flame centerfires design. The sharp flame centerfires provides flame workers with sharper and more driving centerfire flame settings, the same flame settings, found on the Sharp Flame Hand Torch and the top mount of the Stacks Torch.

6 Jet Centerfire, 30 Jet Outer Fire, 1.125" Face Diameter

GAS: 5 PSI, 8 LPM. OXY: 20 PSI, 40 LPM (Full Flame)

800 BTU's (Full Flame)

Bethlehem Burners is proud to announce the release of our very first three-stage bench burner, The Grand! This stainless steel, surface mix torch combines our Alpha, Bravo and Champion torches into one easy to use Bench Burner! The three separately controlled stages provide glass artists with unsurpassed control over flame sizes, heat potential and fuel mixture, making the Grand torch the most versatile and fuel efficient glass working torch available today.

The Grand Sharp Flame is a three-stage, stainless steel, surface-mix torch that can produce 1,150 BTUs per minute, enough heat to easily work up to 50mm borosilicate rod and 80mm+ heavy walled tube! The new surface-mix Sharp Flame centerfire can be pulled down into a tight pinpoint, or sharpened into a long, driving needle, perfect for:

precise heat application for fine detailed work
driving heat penetration
forming seals in hard to reach areas

The Hose Set for 4 Port Torches allows you to attach a single set of hoses to any burner with 4 ports, and consists of 2, 18” long, 1/4” T-grade, oxygen hoses and 2, 18” long, 1/4” T-grade, gas hoses with "B" fittings on one end, clean cut on the other end, and 1 brass oxygen Y connector and 1 brass gas Y connector. Also included is a set of adaptor couplers to attach the "Y" connectors to your existing hose set, and four clamps to attach to the burner.

The Hose Set for 4 Port Torches allows you to attach a single set of hoses to any burner with 4 ports, and consists of 2, 18” long, 1/4” T-grade, oxygen hoses and 2, 18” long, 1/4” T-grade, gas hoses with "B" fittings on both ends, and 1 brass oxygen Y connector and 1 brass gas Y connector. Also included is a set of adaptor couplers to attach the "Y" connectors to your existing hose set.

The Grand Hose and Showerhead Set consists of 3, 18” long, 1/4” T-grade, oxygen welding hoses and 3, 18” long, 1/4” T-grade, gas welding hoses and 1 brass oxygen Showerhead connector and 1 brass gas Showerhead connector. Each hose has female brass B-fittings crimped onto each end and each hose comes with 1 male B-fitting union.

The burner hoses will allow the flame worker to attach the 3 pronged showerhead connectors to the B-fitting valves of the Grand torch. The Showerhead connectors convert the torch from a 6-inlet manifold, into a 2-inlet manifold for those who do not want to use a foot peddle with their torch.