Canada en CAD
  •  
     

IMPLOSION TOOLS

Products: 1–3 of 3
Show:24
Sort by:Recommended
  • VIN PIN IMPLOSION TOOL - 2" DIAMETER

    VIN PIN IMPLOSION TOOL - 2" DIAMETER

    2" Vin Pin implosion tool.

    - Made in the USA
    - This was a joint venture design created by D'Vine Glass. A wonderful glass artist in Alaska. his concept became a reality in our shop.
    - Base is basically a holder to keep everything securely together so it doesn't fall apart as you work with it.
    - 3" Dia. x 1" Thick
    - The top is fine grain graphite drilled for the pins and a nice slip fit to the base.
    - 2" Dia. x 3/8" thick with 91 holes
    - Pins are solid brass pins that are held in the Vin Pin.
    - To change designs, simply unscrew the base hold down screw. Invert the tool and allow the top to separate from the base. Remove as many pins as you want to alter the design and reassemble.

    • CA$115
      • 115   – Reward points
    Out of stock
  • VIN PIN IMPLOSION TOOL - 4" DIAMETER

    VIN PIN IMPLOSION TOOL - 4" DIAMETER

    4" Vin Pin implosion tool.

    - Made in the USA
    - This was a joint venture design created by D'Vine Glass. A wonderful glass artist in Alaska. his concept became a reality in our shop.
    - Base is basically a holder to keep everything securely together so it doesn't fall apart as you work with it.
    - 5" Dia. x 1" Thick
    - The top is fine grain graphite drilled for the pins and a nice slip fit to the base.
    - 4" Dia. x 3/8" thick with as many holes as we could fit the pin heads into.
    - Pins are solid brass pins that are held in the Vin Pin.
    - To change designs, simply unscrew the base hold down screw. Invert the tool and allow the top to separate from the base. Remove as many pins as you want to alter the design and reassemble.

    • CA$148.50
      • 148   – Reward points
    Out of stock
  • VIN PIN IMPLOSION TOOL - 3" x 2"

    VIN PIN IMPLOSION TOOL - 3" x 2"

    3" x 2" Vin Pin implosion tool.

    - Made in the USA
    - Outside Base medium grain graphite 1" thick x 3" wide x 4" long
    - Top insert fine grain graphite
    - 3/8" thick x 2" wide x 3" tall with 125 solid brass pins
    - This was a joint venture design created by D'Vine Glass. A wonderful glass artist in Alaska, his concept became a reality in our shop. - Base is basically a holder to keep everything securely together so it doesn't fall apart as you work with it.
    - 1" thick x 3" wide x  4" long
    - Top insert fine grain graphite
    - 3/8” thick x 2” wide x 3” long with 125 solid brass pins
    - To change designs, simply unscrew the base. Invert the tool and allow the top to separate from the base. Remove as many pins as you want to alter the design and reassemble.

    • CA$115
      • 115   – Reward points
    Only 2 left in stock
    Sorry, we only have 2 of that item available