- CLOSE-OUTS (SALES)
- BARGAIN BIN
- BEADMAKING & FLAMEWORKING
- ACCESSORIES AND FINDINGS
- BEADHOPPERS
- BEADMAKING CHEMICALS & CONSUMABLES
- BORO BATCH GLASS
- BOROGLOW TUBING
- BOROSILICATE GLASS DECALS by HENDRIXSON
- BULLSEYE GLASS - COE 90
- CHINESE GLASS
- CLEAR BOROSILICATE TUBING & ROD
- COMPETTITIVE GLASSWORKS
- CREATION IS MESSY (CiM) GLASS
- CRUSHED OPAL TUBING & RODS
- DICHROIC FRIT
- DICHROIC GLASS
- DICRO SLIDE
- DOUBLE HELIX GLASS
- DREAM TUBING CO. - DICHROIC BORO TUBING
- DREAM TUBING CO. - DICHROIC BORO CANE
- EFFETRE GLASS
- FAIRY DUST - SIMULATED DICHROIC
- FRIT BLENDS - SOFT GLASS
- FUMING
- GILSON & DOPALS OPALS
- GLASKOLBEN
- GLASS ALCHEMY GLASS
- GLOW POWDER
- GOLDSTONE & AVENTURINE
- GREASY GLASS
- GROUND GLASS JOINTS
- ACCUGRIND GROUND GLASS JOINTS
- CHINESE CLEAR GROUND JOINTS
- CHINESE COLOUR GROUND JOINTS
- DIFFUSERS
- GERMAN GROUND GLASS JOINTS
- KECK CLIPS
- LENZ GROUND GLASS JOINTS
- QUARTZ GROUND GLASS JOINTS
- THREADED GLASS VIALS
- UNGROUND GLASS JOINTS
- 10mm GROUND GLASS JOINTS
- 12mm GROUND GLASS JOINTS
- 14mm GROUND GLASS JOINTS
- 19mm GROUND GLASS JOINTS
- DEWAR GROUND GLASS JOINTS
- HEAT DEFENSE PADS
- HIGH TEMPERATURE TAPES & ADHESIVES
- KILN MATS - WOVEN
- KUGLER GLASS - 104 COE
- LAMPWORKING KILNS
- LAUSCHA GLASS
- LEAF, FOILS, TUBING, DISCS, WIRE & GRAIN, INSERTS
- LINED TUBING by BESPOKE GLASS
- LUMIERE LUSTERS™
- MICA POWDERS
- MILLEFIORI
- MOMKA GLASS
- MURRINI - GALAXY
- NORTHSTAR GLASS
- OCEANSIDE GLASS & SYSTEM 96 RODS
- ORIGIN GLASS
- PARRAMORE GLASS
- PDX TUBING
- QUARTZ ROD & TUBING
- REDUCTION FRIT
- REDUCTION RODS
- REICHENBACH 104 GLASS
- SAFETY SUPPLIES - EYEWARE, GLOVES, ETC.
- SAMPLE SETS
- STREAKY STRINGERS AND RODS
- THOMPSON ENAMELS
- TAG - TRAUTMAN ART GLASS
- TOOLS - LAMPWORKING
- BEAD CREATORS
- BEAD & MARBLE MOLDS
- BENCH ROLLERS
- BLOWHOSE ADAPTORS (BOOTS)
- BLOWHOSE, SWIVELS, STOPPERS, CORKS
- BLOWPIPES
- CARBON RODS
- CLEANING TOOLS
- CUTTING & SCORING TOOLS
- DESIGN PUSHES
- FINISHING TONGS
- FLARING TOOLS
- FRIT TRAYS, FRIT SIFTERS, FRIT MAKERS
- GRAPHITE PADS
- GROUND GLASS JOINT TOOLS
- HEMOSTATS
- HOLDING FINGERS - GRABBERS
- IMPLOSION TOOLS
- JACKS
- LATHE TOOLS
- MANDRELS
- MARBLE MOLDS
- MASHING TOOLS
- OPTIC MOLDS
- MEASURING & MARKING TOOLS
- PADDLES
- NECKING TOOLS
- PUSHES
- RAKING & POKING TOOLS
- REAMERS
- REPLACEMENT PARTS
- SHAPING TOOLS
- SHEARS
- SOPHIETA or PUFFER TOOLS
- SCULPTING TOOLS
- TWEEZERS & HOLDING TOOLS
- TORCHES, BURNERS AND ACCESSORIES
- BEVELS
- BEVEL CLUSTERS
- EXQUISITE BEVEL CLUSTERS
- GLASSMATE NATURE SERIES
- GST (GLASSMITH) - CLEAR
- GST (GLASSMITH) - COLOURED
- HARMONY BEVELS
- INFINITY BEVEL CLUSTERS
- ANGEL BEVEL CLUSTERS
- ANIMAL BEVEL CLUSTERS
- ASTROLOGY BEVEL CLUSTERS
- BIRD BEVEL CLUSTERS
- CELTIC BEVEL CLUSTERS
- CORNER & BORDER BEVEL CLUSTERS
- FLORAL BEVEL CLUSTERS
- HEART & RIBBON BEVEL CLUSTERS
- HOLIDAY AND OTHER MISC. THEMED BEVEL CLUSTERS
- MUSICAL BEVEL CLUSTERS
- NAUTICAL BEVEL CLUSTERS
- PRIARIE BEVEL CLUSTERS
- PROFESSIONAL BEVEL CLUSTERS
- RELIGIOUS BEVEL CLUSTERS
- STAR BEVEL CLUSTERS
- BOOKS & PATTERNS
- STAINED GLASS PATTERN BOOKS A - D
- STAINED GLASS PATTERN BOOKS E - I
- STAINED GLASS PATTERN BOOKS J - K
- STAINED GLASS PATTERN BOOKS L - Q
- STAINED GLASS PATTERN BOOKS R - S
- STAINED GLASS PATTERN BOOKS T - Z
- ETCHING
- FUSING
- HOLIDAY & RELIGIOUS
- INSTRUCTIONAL & REFERENCE BOOKS
- LAMPS
- LAMPWORKING & JEWELLERY
- MOSAIC & GARDEN
- NATURE & ANIMALS
- PAINTING
- PROJECTS
- STYLES & THEMES
- WINDOWS & DOORS
- CAME, FOIL, METALS
- CHEMICALS
- FRAMING
- FUSING
- ACCESSORIES & FINDINGS
- ADHESIVES
- BULLSEYE GLASS
- CHEMICALS AND CONSUMABLES
- DICHROIC GLASS
- DISPLAY STANDS & WALL MOUNTS
- FRIT BLENDS - 96COE
- FUSIBLE PAPER & DECALS
- FUSING GLASS PACKS
- FUSING KITS
- FUSING MOLDS
- BOTTLE SLUMPING MOLDS
- CASTING MOLDS - COLOUR DE VERRE
- CASTING MOLDS - CPI (CREATIVE PARADISE)
- CASTING RINGS
- DOOR KNOB MOLDS & HARDWARE
- DROP, DRAPE and SLUMP MOLDS
- LAMP MOLDS
- NOVELTY MOLDS
- OVAL MOLDS
- POT MELT MOLDS
- RECTANGULAR MOLDS
- RELIGIOUS THEMED MOLDS
- ROUND MOLDS
- STAINLESS STEEL MOLDS
- STAND-UP MOLDS
- SQUARE MOLDS
- TEXTURE MOLDS
- WEAVE MOLDS
- FUSING TOOLS
- GLOW FRIT (FUSING)
- GLASSLINE PAINTS
- KILNS & ACCESSORIES
- KILN MATS - WOVEN
- MICA POWDERS & FAIRY DUST (SIMULATED DICHROIC)
- MILLEFIORI & MURRINE
- OCEANSIDE COMPATIBLE & SYSTEM 96 GLASS
- OVERLAYS for FUSED & STAINED GLASS
- PRE CUT FUSIBLE GLASS SHAPES
- SAFETY SUPPLIES - EYEWARE, GLOVES, ETC.
- THOMPSON ENAMELS
- TWISTED CANE
- WALL MOUNTING SYSTEMS
- WISSMACH 96 FRITS
- GLASS SHEETS - FUSIBLE
- GLASS SHEETS - NON FUSIBLE
- GRINDERS, BANDSAWS, CAME SAWS
- HAND TOOLS
- JEWELRY
- JEWELS, GLOBS, RONDELS
- LAMP BASES & ACCESSORIES
- MERCHANDISE
- MOSAIC & PATIO STONE
- PAINTING
- STAINED GLASS BEGINNER KITS
- SUNDRIES
REAMERS
In this section, you will find a variety of graphite reamers and brass reamers, to assist you in your lampworking and flameworking projects.
Please Note:
As we switch, all reamers will feature the industry standard 1:10 taper. This will allow for many additional uses of all reamers.
Sort by:Recommended
DARBY REAMER by SMITH CUSTOM TOOLS
Out of stockDarby Reamer by Smith Custom Tools.
This is a Multi Tool that was created by Darby , so it is named after him.
Octagonal reamer joined to a paddle.Head: Paddle - 2" x 1-1/2", Reamer - 15mm to a point. Highly polished.
Handle: Wood
Overall Length: 305 mm (12")MINI REAMER by SMITH TOOLS
Out of stockMini graphite reamer by Smith Tools.
This reamer consists of a graphite head tapering from a point - 20 mm (point - 3/4").
The handle is wood and the overall tool length is 178 mm (7").MINI CONICAL REAMER by SMITH CUSTOM TOOLS
Out of stockMini graphite conical reamer by Smith Custom Tools.
This tool consists of a pointed, conical shaped graphite rod measuring 76 mm (3") in length x 16 mm (5/8") in diameter. It is mounted on a wood handle for an overall length of 209 mm (8-1/4").
TUNGSTEN TIPPED REAMER by SMITH TOOLS
Only 2 left in stockTungsten tipped graphite reamer by Smith Tools.
38mm OCTAGONAL REAMER by SMITH CUSTOM TOOLS
Only 2 left in stock38mm octagonal graphite reamer by Smith Custom Tools.
Head: Graphite, Octagonal, highly polished.
Handle: Wood with a counter weight.
Overall Length: 336 mm (13-1/4")DARBY REAMER by BLAST SHIELD
Only 2 left in stockThis is a Multi Tool that was created by Darby , so it is named after him.
Small Octagon Reamer 1-10 taper , with a 1" x 2" x 1/2" graphite pad below it. Wood handle with counterbalance.PENCIL REAMER - FIRE BUG TOOLS
Only 6 left in stockPencil Reamer - Handy little detail reamer with a real pencil handle.
A graphite reamer measuring 39 mm in length and 1.5 mm at the tip tapering to 12 mm in width.Reamer contains an internal star locking washer which ensures that the graphite stays in place while being used. (SOMETIMES DURING THE TIGHTENING PROCESS A SMALL CRACK OR "RUN" CAN DEVELOP IN THE PENCIL HANDLE - THIS IS CONSIDERED NORMAL AND DOESN'T USUALLY AFFECT THE TOOL IN ANY WAY)
NOTE: THESE COME IN DIFFERENT COLOURS - WE WILL SHIP WHAT'S AVAILABLE AT THE TIME YOUR ORDER IS PLACED
5/8" SHORT REAMER - FIRE BUG TOOLS
Out of stockA graphite reamer measuring 39 mm in length and 2 mm at the tip tapering to 15 mm in width.
Reamer contains an internal star locking washer which ensures that the graphite stays in place while being used.
2-1/2" REAMER - FIRE BUG TOOLS
Only 3 left in stockA graphite reamer measuring 63 mm in length and 2 mm at the tip tapering to 25 mm in width.
Reamer contains an internal star locking washer which ensures that the graphite stays in place while being used.
3" REAMER - FIRE BUG TOOLS
Only 2 left in stockA graphite reamer measuring 76 mm in length and 2 mm at the tip tapering to 15 mm in width.
Reamer contains an internal star locking washer which ensures that the graphite stays in place while being used
LARGE 3" REAMER - FIRE BUG TOOLS
Only 1 left in stockA graphite reamer measuring 76 mm in length and 4.5 mm at the tip tapering to 36 mm in width.
Reamer contains an internal star locking washer which ensures that the graphite stays in place while being used.
4" REAMER - FIRE BUG TOOLS
Only 2 left in stockA graphite reamer measuring 101 mm in length and 2 mm at the tip tapering to 18 mm in width.
Reamer contains an internal star locking washer which ensures that the graphite stays in place while being used.
LARGE 4" REAMER - FIRE BUG TOOLS
Only 1 left in stockA graphite reamer measuring 101 mm in length and 4 mm at the tip tapering to 29 mm in width.
Reamer contains an internal star locking washer which ensures that the graphite stays in place while being used.
SHOT GLASS REAMER - FIRE BUG TOOLS
Only 2 left in stockShot Glass Reamer.
A graphite reamer measuring 63 mm in length and 26 mm at the tip tapering to 43 mm in width.Reamer contains an internal star locking washer which ensures that the graphite stays in place while being used.
SHOT GLASS REAMER XL - FIRE BUG TOOLS
Only 2 left in stockExtra Large Shot Glass Reamer.
A graphite reamer measuring 63 mm in length and 35 mm at the tip tapering to 51 mm in width.Reamer contains an internal star locking washer which ensures that the graphite stays in place while being used.
MEDIUM PLUG REAMER - FIRE BUG TOOLS
Only 2 left in stockMedium Plug Reamer.
A graphite reamer measuring 25 mm in length and 22 mm at the tip tapering to 36 mm in width.Reamer contains an internal star locking washer which ensures that the graphite stays in place while being used
GRAPHITE REAMER - RIBBED - 5 mm - 15 mm (1:10 TAPER) (HEAD ONLY)
Graphite reamer that tapers from 5mm to 15mm (1/8" to 1/2") and is 100mm (4") long. Used to expand holes in the ends or sides of tubing, or to create any opening.
Head: Graphite, ribbed
CAUTION;
The tips are very delicate and very sharp. Use with care.NOTE: HANDLE NOT INCLUDED
BRASS PUFFCO PROXY TOOL
The Puffco is designed for making fitting cup forms for the Puffco Proxy. Covering the graphite in molten glass will create the perfect opposite shape for the Puffco Proxy. With the airflow opening running through the tube and graphite this tool becomes even more versatile making it a tool that every glass blower should have in their toolbox.
The tool features a graphite head with a 39.13mm radius secured to a 5/8 inch hollow brass handle. The graphite tapers from 41mm circumference at the top to 37mm circumference at the bottom, and is 1 inch tall.HOLLOW BLOWING REAMER - 5 - 15mm (HEAD ONLY)
Our hollow reamers are smooth and give you the option of being able to blow through them to keep an object inflated or a tube from collapsing. This hollow reamer is 110mm long and tapers from 5mm to 15mm. Our custom stainless steel handle will accept a 1/4" hose set and the handle is covered with our heat, chemical and flame resistant cover.
Machined on the industry standard 1:10 taper.HANDLE NOT INCLUDED
HOLLOW BLOWING REAMER - 10 - 20mm (HEAD ONLY)
Our hollow reamers are smooth and give you the option of being able to blow through them to keep an object inflated or a tube from collapsing. This hollow reamer is 110mm long and tapers from 10mm to 20mm. Our custom stainless steel handle will accept a 1/4" hose set and the handle is covered with our heat, chemical and flame resistant cover.
Machined on the industry standard 1:10 taper.HANDLE NOT INCLUDED
HOLLOW BLOWING REAMER - 20 - 30mm (HEAD ONLY)
Our hollow reamers are smooth and give you the option of being able to blow through them to keep an object inflated or a tube from collapsing. This hollow reamer is 110mm long and tapers from 20mm to 30mm. Our custom stainless steel handle will accept a 1/4" hose set and the handle is covered with our heat, chemical and flame resistant cover.
Machined on the industry standard 1:10 taper.HANDLE NOT INCLUDED