Canada en CAD
  •  
     

PUSHES

Offered are a variety of pushes, in brass, graphite and stainless steel, both plain and with nipple for your lampworking projects.

Products: 1–20 of 20
Show:24
Sort by:Recommended
  • 1/4" ANGLED SCULPTING PUSH - FIRE BUG TOOLS

    1/4" ANGLED SCULPTING PUSH - FIRE BUG TOOLS

    Handy little 1/4" angled sculpting push on a wooden handle

    • CA$30
      • 30   – Reward points
    Sorry, we only have 2 of that item available
  • 3/8" ANGLED SCULPTING PUSH - FIRE BUG TOOLS

    3/8" ANGLED SCULPTING PUSH - FIRE BUG TOOLS

    Handy little 3/8" angled sculpting push on a wooden handle

    • CA$30
      • 30   – Reward points
    Sorry, we only have 2 of that item available
  • GRAPHITE BOWL PUSH - 1/2" - FIRE BUG TOOLS

    GRAPHITE BOWL PUSH - 1/2" - FIRE BUG TOOLS

    Graphite push - 13mm (1/2"). Wooden Handle included

    • CA$25
      • 25   – Reward points
    Sorry, we only have 2 of that item available
  • GRAPHITE BOWL PUSH - 5/8" - FIRE BUG TOOLS

    GRAPHITE BOWL PUSH - 5/8" - FIRE BUG TOOLS

    Graphite push - 16mm (5/8"). Wooden Handle included

    • CA$27
      • 27   – Reward points
    Sorry, we only have 2 of that item available
  • GRAPHITE BOWL PUSH - 3/4" by BLAST SHIELD TOOLS

    GRAPHITE BOWL PUSH - 3/4" by BLAST SHIELD TOOLS

    3/4" graphite bowl push by Blast Shield Tools.

    Head: Graphite with a straight taper.
    Handle: Wood
    Overall length: 9"

    • CA$35
      • 35   – Reward points
    Sorry, we only have 2 of that item available
  • GRAPHITE BOWL PUSH - 3/4" with LONG PICK by BLAST SHIELD TOOLS

    GRAPHITE BOWL PUSH - 3/4" with LONG PICK by BLAST SHIELD TOOLS

    3/4" graphite bowl push with long stainless steel pick by Blast Shield Tools.

    Head: Graphite with a bullet head and a 1" stainless steel pick.
    Handle: Wood
    Overall length: 10"

    • CA$49
      • 49   – Reward points
    Sorry, we only have 2 of that item available
  • GRAPHITE BOWL PUSH - 3/4" - FIRE BUG TOOLS

    GRAPHITE BOWL PUSH - 3/4" - FIRE BUG TOOLS

    Graphite push - 19mm (3/4"). Wooden Handle included

    • CA$29
      • 29   – Reward points
    Sorry, we only have 1 of that item available
  • GRAPHITE PUSH - 1" STRAIGHT TAPER HEAD ONLY)
    • 89% off

    GRAPHITE PUSH - 1" STRAIGHT TAPER HEAD ONLY)

    Graphite push - 25mm (1").
    Two locking nuts securely fasten the wood handle and the graphite head to the stainless shaft.

    NOTE: HANDLE NOT INCLUDED

      • 89% off
      CA$22.35 save CA$19.85
    • CA$2.50
      • 2   – Reward points
    Sorry, we only have 963 of that item available
  • GRAPHITE BOWL PUSH - 10mm NO TIP (HEAD ONLY)
    • 87% off

    GRAPHITE BOWL PUSH - 10mm NO TIP (HEAD ONLY)

    A graphite bowl push, measuring 10mm (3/8") in diameter x 76mm (3") in length.

    The handle is 165mm (6-1/2") for an overall tool length of 241mm (9-1/2").

    NOTE: HANDLE NOT INCLUDED

      • 87% off
      CA$15.45 save CA$13.45
    • CA$2
      • 2   – Reward points
    Sorry, we only have 1 of that item available
  • GRAPHITE BOWL PUSH - 10mm WITH TIP HEAD ONLY)
    • 83% off

    GRAPHITE BOWL PUSH - 10mm WITH TIP HEAD ONLY)

    A graphite bowl push, measuring 10mm (3/8") in diameter x 76mm (3") in length with a brass tip.

    The handle is 165mm (6-1/2") for an overall tool length of 241mm (9-1/2").

    The tip is brass and is 3mm (1/8")" in diameter and 12mm (1/2") in length. Heat, chemical and flame resistant handle cover included.

    NOTE: HANDLE NOT INCLUDED

      • 83% off
      CA$17.45 save CA$14.45
    • CA$3
      • 3   – Reward points
    Sorry, we only have 2 of that item available
  • GRAPHITE BOWL PUSH - 16mm NO TIP (HEAD ONLY)
    • 84% off

    GRAPHITE BOWL PUSH - 16mm NO TIP (HEAD ONLY)

    A graphite bowl push, measuring 16mm (5/8") in diameter x 76mm (3") in length.

    The handle is 165mm (6-1/2") for an overall tool length of 241mm (9-1/2").

    Heat, chemical and flame resistant handle cover included.

    NOTE: HANDLE NOT INCLUDED

      • 84% off
      CA$18.60 save CA$15.60
    • CA$3
      • 3   – Reward points
    Sorry, we only have 941 of that item available
  • GRAPHITE BOWL PUSH - 19mm NO TIP (HEAD ONLY)
    • 85% off

    GRAPHITE BOWL PUSH - 19mm NO TIP (HEAD ONLY)

    A graphite bowl push, measuring 19mm (3/4") in diameter x 76mm (3") in length.

    The handle is 165mm (6-1/2") for an overall tool length of 241mm (9-1/2").

    Heat, chemical and flame resistant handle cover included.

    NOTE: HANDLE NOT INCLUDED

      • 85% off
      CA$20.10 save CA$17.10
    • CA$3
      • 3   – Reward points
    Sorry, we only have 40 of that item available
  • HOLLOW BOWL PUSH - 10mm (HEAD ONLY)
    • 83% off

    HOLLOW BOWL PUSH - 10mm (HEAD ONLY)

    A  hollow graphite bowl push with a hollow 3mm (1/8") replaceable, threaded brass tip.

    The custom hollow, stainless handle is 215mm (8-1/2") in length (9-1/2"), the graphite is 63mm (2-1/2") long, for an overall tool length of 289mm (11-3/8").

    Heat, chemical and flame resistant handle cover included.

    HANDLE NOT INCLUDED

      • 83% off
      CA$30 save CA$25
    • CA$5
      • 5   – Reward points
    Sorry, we only have 13 of that item available
  • HOLLOW BOWL PUSH - 13mm (HEAD ONLY)
    • 83% off

    HOLLOW BOWL PUSH - 13mm (HEAD ONLY)

    A  hollow graphite bowl push with a hollow 3mm (1/8") replaceable, threaded brass tip.

    The custom hollow, stainless handle is 215mm (8-1/2") in length (9-1/2"), the graphite is 63mm (2-1/2") long, for an overall tool length of 289mm (11-3/8").

    Heat, chemical and flame resistant handle cover included.

    HANDLE NOT INCLUDED

      • 83% off
      CA$30.20 save CA$25.20
    • CA$5
      • 5   – Reward points
    Sorry, we only have 11 of that item available
  • HOLLOW BOWL PUSH - 16mm (HEAD ONLY)
    • 84% off

    HOLLOW BOWL PUSH - 16mm (HEAD ONLY)

    A  hollow graphite bowl push with a hollow 3mm (1/8") replaceable, threaded brass tip.

    The custom hollow, stainless handle is 215mm (8-1/2") in length (9-1/2"), the graphite is 63mm (2-1/2") long, for an overall tool length of 289mm (11-3/8").

    Heat, chemical and flame resistant handle cover included.

    HANDLE NOT INCLUDED

      • 84% off
      CA$31.20 save CA$26.20
    • CA$5
      • 5   – Reward points
    Sorry, we only have 1 of that item available
  • HOLLOW BOWL PUSH - 19mm (HEAD ONLY)
    • 84% off

    HOLLOW BOWL PUSH - 19mm (HEAD ONLY)

    A  hollow graphite bowl push with a hollow 3mm (1/8") replaceable, threaded brass tip.

    The custom hollow, stainless handle is 215mm (8-1/2") in length (9-1/2"), the graphite is 63mm (2-1/2") long, for an overall tool length of 289mm (11-3/8").

    Heat, chemical and flame resistant handle cover included.

    HANDLE NOT INCLUDED

      • 84% off
      CA$31.40 save CA$26.40
    • CA$5
      • 5   – Reward points
    Sorry, we only have 7 of that item available
  • RINGED DOT PUSH - 6mm

    RINGED DOT PUSH - 6mm

    This handy push allows you to create a "Depression Ring" around the base of your dots.

    Graphite is 38mm (1-1/2") in length, with an aluminum handle, for an overall tool length of 165mm (6-1/2").

    This push allows you to create a dot with a depressed ring around the base. Can be used with the base bead alone or over an existing dot. Experiment with different effects in the depression.

    The tool is threaded into the handle for a secure fit, and comes with our heat, chemical and flame resistant handle cover.

    • CA$9
      • 9   – Reward points
    Sorry, we only have 19 of that item available
  • RINGED DOT PUSH - 8mm

    RINGED DOT PUSH - 8mm

    This handy push allows you to create a "Depression Ring" around the base of your dots.

    Graphite is 38mm (1-1/2") in length, with an aluminum handle, for an overall tool length of 165mm (6-1/2").

    This push allows you to create a dot with a depressed ring around the base. Can be used with the base bead alone or over an existing dot. Experiment with different effects in the depression.

    The tool is threaded into the handle for a secure fit, and comes with our heat, chemical and flame resistant handle cover.

    • CA$9.20
      • 9   – Reward points
    Sorry, we only have 27 of that item available
  • RINGED DOT PUSH - 10mm

    RINGED DOT PUSH - 10mm

    This handy push allows you to create a "Depression Ring" around the base of your dots.

    Graphite is 38mm (1-1/2") in length, with an aluminum handle, for an overall tool length of 165mm (6-1/2").

    This push allows you to create a dot with a depressed ring around the base. Can be used with the base bead alone or over an existing dot. Experiment with different effects in the depression.

    The tool is threaded into the handle for a secure fit, and comes with our heat, chemical and flame resistant handle cover.

    • CA$9.80
      • 9   – Reward points
    Sorry, we only have 29 of that item available
  • RINGED DOT PUSH - 12mm

    RINGED DOT PUSH - 12mm

    This handy push allows you to create a "Depression Ring" around the base of your dots.

    Graphite is 38mm (1-1/2") in length, with an aluminum handle, for an overall tool length of 165mm (6-1/2").

    This push allows you to create a dot with a depressed ring around the base. Can be used with the base bead alone or over an existing dot. Experiment with different effects in the depression.

    The tool is threaded into the handle for a secure fit, and comes with our heat, chemical and flame resistant handle cover.

    • CA$10.20
      • 10   – Reward points
    Sorry, we only have 28 of that item available