MARBLE MOLDS

Designed by Drew Fritts, the Infinite Rim Multi Hole Marble molds are the most sought-after in the industry.
This Infinite Rim is a duel sided marble mold with holes of 1/2", 5/8", 3/4" and 1" on one side and a single 1-1/4" on the opposite side.
The molds are made from top quality isostatic graphite and have lightweight hollow titanium counter balanced handles that are 11-1/2" in length.

A tapered graphite marble mold with sizes of 13, 16 & 19mm (1/2", 5/8" & 3/4").

Heat, chemical and flame resistant handle cover included.

A tapered graphite marble mold with sizes of 22 & 25mm (7/8" & 1").

Heat, chemical and flame resistant handle cover included.

A tapered graphite marble mold with sizes of 25 & 28mm (1" & 1-1/8" (+/-1/16").

Heat, chemical and flame resistant handle cover included.

Graphite marble mold that measures 31mm (1-1/4") in diameter. Two (2) threaded handle mounting holes, 180º apart, allow you to move the handle to use the complete rim of the mold. Our trademark "Volcano" lip allows easy, non-stick forming of the marble.
Also, the handle is mounted low on the mold so the mold sits perfectly flat on the work table.

Head: Graphite.
Shaft: Stainless steel.
Handle: Wood, stained and finished.

Graphite marble mold that measures 38mm (1-1/2") in diameter. Two (2) threaded handle mounting holes, 180º apart, allow you to move the handle to use the complete rim of the mold. Our trademark "Volcano" lip allows easy, non-stick forming of the marble.
Also, the handle is mounted low on the mold so the mold sits perfectly flat on the work table.

Head: Graphite.
Shaft: Stainless steel.
Handle: Wood, stained and finished.

Graphite marble mold that measures 44mm (1-3/4") in diameter. Two (2) threaded handle mounting holes, 180º apart, allow you to move the handle to use the complete rim of the mold. Our trademark "Volcano" lip allows easy, non-stick forming of the marble. Heat, chemical and flame resistant handle cover included.
Also, the handle is mounted low on the mold so the mold sits perfectly flat on the work table.

Graphite marble mold that measures 51mm (2") in diameter. Two (2) threaded handle mounting holes, 180º apart, allow you to move the handle to use the complete rim of the mold. Our trademark "Volcano" lip allows easy, non-stick forming of the marble. Heat, chemical and flame resistant handle cover included.
Also, the handle is mounted low on the mold so the mold sits perfectly flat on the work table.

Graphite marble mold that measures 76mm (3") in diameter. Two (2) threaded handle mounting holes, 180º apart, allow you to move the handle to use the complete rim of the mold. Our trademark "Volcano" lip allows easy, non-stick forming of the marble. Heat, chemical and flame resistant handle cover included.
Also, the handle is mounted low on the mold so the mold sits perfectly flat on the work table.

This graphite marble mold measures 100mm x 56mm x 19mm thick ( 3-7/8" x 2-1/4" x 3/4" thick).
The mold features 7 different sizes which are 10mm, 13mm, 16mm, 19mm, 22mm, 25mm and 28mm (3/8", 1/2", 5/8", 3/4", 7/8", 1" and 1-1/8").
Overall tool length is 305 mm (12").

This is a large, bench top marble mold with 4 sizes, which are 31mm, 38mm, 44mm and 51mm (1-1/4", 1-1/2", 1-3/4" and 2") in size.

The overall graphite size is 216mm x 69mm x 35mm thick (8-1/2" x 2-3/4" x 1-3/8").

Move or hold hot objects from 19 mm (3/4") to 63 mm (2-1/2").
Marble tongs are 267 mm (10-1/2") in overall length.