Textured Coaster draping mold by CPI.

Mold size: 6 x 12.5"

The Textured Coaster Drape mold is designed to both drape and texture coasters in the same firing!

Instructions for use:
Apply glass separator to the Textured Coaster mold.
Place 5” square pieces of clear iridized glass iridized surface down on the center of each of the circular humps on the mold.
Place pieces of compatible glass on the top of the 5” squares of clear iridized glass on the mold. Fire the mold with the glass at 250 degrees per hour to 1460 degrees. Anneal and enjoy!