HAND FOILERS by CREATOR'S
The Creator's Handy Foiler speeds up the foiling process for glass while keeping the foil centered.
AVAILABLE IN 3/16", 7/32" and 1/4"
DON'T BE FOOLED BY THE KNOCK-OFFS OUT THERE - ONLY CREATOR'S WILL GIVE YOU THE SEAMLESS FOILING EXPERIENCE THAT YOU WANT FROM A HAND FOILER
Hand Foiler Instructions:
Remove all oil from glass and grind it so that the foil will stick.
Insert foil into opposite end of Roller through the slot. After inserting into the slot, peel back foil approximately 3" inches from the paper. Remove 1" of the paper backing and back through until the paper is showing on the other side of the slot. Then proceed to pull the foil up to the other end towards the Roller. Guide foil underneath the roller. Now the paper backing should easily separate when you begin to foil your glass.
Grasp the foiler leaving thumb free. Insert edge of glass piece between guides on the underside of the tool.
It is important to hold the foiler stationary while rotating the piece of glass. KEEP ROLLER PRESSED AGAINST EDGE OF GLASS WITH EVEN PRESSURE DURING ENTIRE APPLICATION.
Tips: You can mount your foiler to a table edge using a c-clamp. This allows you to be hands free from holding the foiler.