The digital SC-2 kiln fires silver clay, decals, china paint, enameling, and glass in minutes up to 2000°F. The SC-2 is popular because it fires fast, plugs into a standard 120 volt household outlet and ships by UPS.
We have just redesigned the kiln for improved heat distribution. The new design has two separate heating elements in the left and right sides of the firing chamber. The back of the chamber has no element. Extensive testing shows that the heat distribution in the new SC-2 is more even throughout the firing chamber, because heat does not build up in the back of the kiln. The SC-2 has been in production since 1997. It is a proven design that we have steadily refined every year.
Thousands of artists in the U.S., Canada, Europe, and Japan love their SC-2. The SC-2, for a digital kiln, is surprisingly affordable. It fires automatically at the rate and temperature you enter. A large, brightly lit display prompts for firing rate, temperature and hold time. Use the hold feature to automatically soak any type of clay silver to its recommended time. The fast-firing element is embedded in the firing chamber shell. The SC-2 heats from the sides and back.
SC-2 Features Improved heat distribution.
On/off safety switch.
Built-in base; no extra stand needed.
Door opens 180 degrees The case is slotted for air circulation Electrical components in the base stay cool even at extended hold times The embedded element heats from the two sides and back Top vent complete with tapered plug for lost wax casting Includes a 1/4” thick ceramic fiber shelf Optional SC-2 glass view port.
The reliable Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold. Features of the Sentry Xpress 3-key Controller on Non-Ceramic Paragon Kilns Design programs with up to 8 segments (steps) in Ramp-Hold mode. Fire to a single temperature at a single speed in the simplified Single Speed mode. Ramp-Hold mode can store 4 programs. Skip a segment in Ramp-Hold during firing without having to stop the kiln to reprogram. Change the target temperature in Ramp-Hold during firing without having to stop the kiln to reprogram. Hold (soak) the temperature in both Single Speed and Ramp-Hold. Experiment with Hold to improve colour saturation of china paints. Add Hold Time during firing without having to stop the kiln to reprogram. Control both heating and cooling in Ramp-Hold. Program Review lets you check the program you are about to fire. Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Use this to remind yourself to check on the kiln. Temperature display throughout firing and cooling in your choice of °F or °C Thermocouple Offset adjusts the thermocouple readout. Set the Delay to turn on the kiln later to suit your schedule. Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element. 12 Month Warranty LED Lights show whether you are in program, review, or firing mode. Colorful, illustrated instruction manual.
The SC-2 can ship by UPS. Enjoy lower shipping cost and faster service. Specially designed cartons and foam padding assure that the kiln will arrive safely.
Max. Temperature 2000F 1093C
Amps 12
Phase 1
Watts 1440 Nema 5-15P Breaker Size 15 Circuit Wire Size 14 gauge
Certified to CSA & UL Std 499 YES
Control Type Sentry Digital 3-key Glass Control Voltage 120 Hertz 60
Sides 4
Chamber Volume 0.21 CU.FT. 5.95 litres Chamber Width 8.00 204 mm Chamber Depth 7.75 197 mm Chamber Height 5.75 147 mm
Bead Door 6.5"W x 2.5"H
Outer Size 13.25W x 14.00D x 15.50H Inches 337W x 356D x 394H mm
Ship Size 21.50W x 18.75D x 16.50H Inches 547W x 477D x 420H mm
Ship Weight 36.00 Lbs. 16.33 Kg.
Ship Method This Kiln Ships Via UPS

  • CA$2,070
  • 207   — Reward points

In stock(979 items available)
    • SKU
    • Weight
      60 lbs
    • Dimensions (L x W x H)
      22 x 19 x 17 in

Customers who bought this product also bought

Customers who viewed this product also bought