FUSIBLE GLASS BAILS - 96 COE (SOLD PER EA)

SKU: FGB

About Our Fusible Glass Bails

These fusible precut glass bails are made from 100% Oceanside Glass and are compatible with any other COE 96 glass. They are the best solution for easily displaying your glass art without drilling holes.

Our glass bails are 3mm thick, .5in in diameter

How to Use Precut Glass Bails

There are two main ways we recommend connecting one of these bails to your glass artwork:

Place a small piece of glass (such as a glass dot, frit ball, or murrine) above the open gap of the bail such that the small piece of glass overlaps both your glass piece and the bail.
OR for a hidden attachment, slide the bail under your work so that the edge overlaps the open gap side of the bail. This method is recommended for works that have two or more layers of 3mm glass.

Tips on Using the Bails

Only use these COE 96 bails on glass projects using COE glass! Fusing multiple glass elements with different COEs will cause cracks and ruin your artwork. If you are looking for COE 90 glass bails, click here to view our COE 90 fusible glass bails.
Make sure the slit side of the bail is facing the inside of your piece.
Bails can be used as design elements, not just hangers.

Firing Notes

Fuse to 1430°F-1470°F (775°C-800°C). (Fast firing - adjust lower for slower firings)
Avoid exceeding 1485°F to keep the bail hole open.
If firing above 1485°F, fire your work separately and attach the bail in a second firing.
If firing below 1430°F, fire the base and bail together at 1430°F or higher first, then proceed with lower temp firing.