PARAGON CS-16D CLAMSHELL GLASS KILN
(1000 items available)
A very versatile design for a glass kiln. Operates on 120 volts. The firing chamber lifts out of the way so you can assemble glass pieces right inside the kiln. Add stringers and frit to delicate designs without moving them later. This kiln is dual-opening. Open the kiln by lifting the kiln body or by lifting the lid only. Lift the kiln body out of the way to assemble glass directly on the shelf; open the lid to load glass over a mold. The kiln is easy to open because of two counter-weight springs mounted under the bottom. The kiln base extends 4" in the back to support the weight of the kiln in the open position. The digital Sentry XPress controller is standard. Control both heating and cooling with simple 3-key operation. The kiln heats from the top for even heat distribution across the glass surface. The lid elements are mounted in pinless element grooves. The top of the lid is protected with a painted sheetmetal cover. Comes standard with firebrick top. Comes with an 18" tall stand. Comes with mandatory Lid Safety Switch to meet CSA standard.