How-to Use This Tool:

Assemble the soldering iron stand by removing the nut from the base of the wire cage. Insert the cage into the the hole located on the base of the stand behind the sponge well. Turn the stand over and screw the nut clockwise until snug, making sure the cage is facing forward before completely tightening nut down.
Place the small rectangular tip cleaning sponge into the well located in the center of the base. Wet the sponge before use with water.
To clean soldering iron wipe tip against the wet sponge during soldering.

Soldering Iron Stands are designed to hold all major irons.