STAINED GLASS GRINDERS & ACCESSORIES

On the following pages, you will find a variety of Inland Grinders and accessories.

Stained glass grinding heads, face shields, and accessories are also here.

Products: 124 of 29
Drop items here to shop
Product has been added to your cart
  • AANRAKU 3/4" "TWOFERS" GRINDING BITS

    AANRAKU 3/4" "TWOFERS" GRINDING BITS

    Two bits for the price of one! Twofers offer a superior quality bit at an exceptional cost.
    - More grinding surface than any other bits - Extended grinding life - Diamond abrasive bonding is double plated for strength, dependability and long life - Abrasive grinding surface is spaced to maximize bite all allows for exceptional fixing of diamond to brass core for extra long life and smooth uniform grinding

    Standard ( 100/120 grit) OR Medium (170 grit) available.

    • CA$41.94
  • AANRAKU 3/4" "TWOFERS" FINE EDGE FINISHING BITS

    AANRAKU 3/4" "TWOFERS" FINE EDGE FINISHING BITS

    Package contains (2) bits for the price of one! Creates an incredibly smooth edge. Ideal before firing cabochons and other fused pieces.

    Fine Grit (220 grit)

    • CA$40.76
  • AANRAKU 3/4" "TWOFERS"  ULTRA FINE EDGE FINISHING BITS

    AANRAKU 3/4" "TWOFERS" ULTRA FINE EDGE FINISHING BITS

    Package contains (2) bits for the price of one! Creates an incredibly smooth edge. Ideal before firing cabochons and other fused pieces.

    Ultra Fine (600 grit)

    • CA$40.76
  • AANRAKU 1" "TWOFERS" GRINDING BITS

    AANRAKU 1" "TWOFERS" GRINDING BITS

    Two bits for the price of one! Twofers offers a superior quality bit at an exceptional cost.
    - More grinding surface than any other bits - Extended grinding life - Diamond abrasive bonding is double plated for strength, dependability and long life - Abrasive grinding surface is spaced to maximize bite all allows for exceptional fixing of diamond to brass core for extra long life and smooth uniform grinding

    • CA$49.16
  • AANRAKU "TWOFERS" 1" ULTRA FINE GRINDER HEADS

    AANRAKU "TWOFERS" 1" ULTRA FINE GRINDER HEADS

    Package contains (2) bits for the price of one! Creates an incredibly smooth edge. Ideal before firing cabochons and other fused pieces.

    Ultra Fine (600 grit)

    • CA$54.24
  • AANRAKU 1" "TWOFERS"  JEWELRY BITS

    AANRAKU 1" "TWOFERS" JEWELRY BITS

    Package contains (2) bits for the price of one! Creates a channel for 18/20 gauge wire. 

    Fine (220 grit)

    • CA$47.10
  • AANRAKU 1/4" & 1/8" "TWOFERS" GRINDING BITS

    AANRAKU 1/4" & 1/8" "TWOFERS" GRINDING BITS

    Two bits for the price of one! Twofers offers a superior quality bit at an exceptional cost.
    - More grinding surface than any other bits - Extended grinding life - Diamond abrasive bonding is double plated for strength, dependability and long life - Abrasive grinding surface is spaced to maximize bite all allows for exceptional fixing of diamond to brass core for extra long life and smooth uniform grinding

    • CA$38.82
  • AANRAKU 3/8" TWOFERS GRINDING BITS

    AANRAKU 3/8" TWOFERS GRINDING BITS

    3/8" Grinding Heads 2/pkg.
    • CA$34.38
  • AANRAKU RIPPLE "TWOFERS" GRINDING BITS

    AANRAKU RIPPLE "TWOFERS" GRINDING BITS

    Two bits for the price of one! Twofers offer a superior quality bit at an exceptional cost.
    - More grinding surface than any other bits - Extended grinding life - Diamond abrasive bonding is double plated for strength, dependability and long life - Abrasive grinding surface is spaced to maximize bite all allows for exceptional fixing of diamond to brass core for extra long life and smooth uniform grinding

    Standard (100/120 grit).

    • CA$19.66
  • GRINDER COOKIE

    GRINDER COOKIE

    The grinder cookie positions and holds glass while grinding, and saves wear and tear on fingers.

    • CA$19.56
  • NICK'S GRINDER MATE

    NICK'S GRINDER MATE

    Grips glass firmly. Protects fingertips. Moves smoothly. Improves accuracy. Improves grinding speed. Keeps glass 90 degree to grinder head. Frees hands for supporting glass. Makes grinding fun.

    • CA$27
  • NICK'S GRINDER MATE REPLACEMENT PADS

    NICK'S GRINDER MATE REPLACEMENT PADS

    Replacement pads for the Nick's Grinder Mate Set of 2 Pads

    • CA$3.10
  • INLAND WIZLING CG GRINDER

    INLAND WIZLING CG GRINDER

    The WizlingCG glass grinder is a great choice for the budget-conscious or new glass art hobbyists. Use this American-made machine for grinding and shaping glass edges, stained glass work or lapidary projects. The WizlingCG accepts many different grinding bits to accommodate your edge grinding needs.

    The WizlingCG gives you the features you want and the power you need at an affordable price. Setup is easy. Simply install the included diamond grinding bit, wet the coolant sponge with clean water and turn it on with the two-way power switch.

    PLEASE NOTE;
    THIS GRINDER IS CSA APPROVED AND LEGAL TO SELL AND OWN IN CANADA.

    Key features;
    Powerful motor allows the WizlingCG to run all 3/4" and smaller grinding bits.
    Machine housing is lightweight, rustproof and impact resistant, making it easy to travel with and very portable.
    Large 10-1/2" X 8-1/2" work surface is reversible and provides enough room for larger projects.
    Lift-off reservoir can be easily removed for fast and easy cleaning.
    Accepts (but doesn't include) Inland Craft's wire frame face shield support for use with our FaceShield or MagnaShield accessories.
    WizlingCG is the same size, body design and work surface size found on the WizCG grinder.

    What's included; (NOTE: DUE TO PARTS SHORTAGES, ACCESSORIES INCLUDED MAY CHANGE FROM SHIPMENT TO SHIPMENT)
    3/4" diameter, 100# diamond grinding bit with Allen wrench.
    Coolant sponge.
    3/4" standard BitSert (accommodates 3/4" diameter and smaller grinding bits).
    Grinder bit splash guard.
    Instruction manual.
    Five-year warranty.

    Optional accessories;
    SecondStory work surface – Elevated work surface that makes it easier to grind and drill holes when using small diameter drilling heads or a stacked bit set up.
    FaceShield – Large, 10" X 8-3/4" acrylic face shield provides added protection from grinding and sawing debris.
    MagnaShield – Large, 10" X 8-3/4" face shield has a built-in optical quality convex magnifying surface making it easier to see your work, reduces eye strain, and provides additional protection against grinding and sawing debris.

    Machine specifications;
    Machine dimensions: 12" L X 10" W X 7" H
    Machine weight: 6-1/2 lbs.
    Grinder housing construction: injection-molded plastic.
    Work surface: 10-1/2" L X 8-1/2" W open grid surface.

    Motor specifications;
    Voltage: 115V (U.S. plug)
    RPM/UPM (idle): 3,500
    Maximum torque: 16 oz-in
    Frequency: 60Hz
    Maximum horse power: 1/22 hp
    Watts in: 97
    Watts out (at peak torque): 33
    Motor shaft outer diameter: 0.312" (5/16") stainless steel.

    • CA$244.48
  • INLAND WIZ CG GRINDER

    INLAND WIZ CG GRINDER

    The WizCG is the best-seller because of its power and value. The workhorse 30 oz-in torque motor offers plenty of power to do the jobs you want. Use this American-made machine for grinding and shaping glass edges, doing stained glass work and drilling holes in glass. The WizCG comes with TWO different sized grinding bits to accommodate your edge-grinding needs, which is a great value! You can use both grinding bits at once, eliminating removing/replacing different sized grinding bits! The WizCG is a great choice for hobbyists who require quality.

    Setup is easy. Simply install the two included diamond grinding bits, wet the coolant sponges with clean water and turn it on with the two-way power switch.

    PLEASE NOTE;
    THIS GRINDER IS CSA APPROVED AND LEGAL TO SELL AND OWN IN CANADA.

    Key features;
    Powerful 30 oz-in torque, 115V motor provides all the power you need to get the job done.
    Machine housing is lightweight, rustproof and impact resistant, making it easy to travel with and very portable.
    Use TWO different sized grinding bits at the same time.
    Large 10-1/2" X 8-1/2" work surface is reversible and provides enough room for larger projects.
    Lift-off reservoir can be easily removed for fast and easy cleaning.
    Accepts (but doesn't include) Inland Craft's wire frame face shield support for use with our FaceShield or MagnaShield accessories.

    What's included; (NOTE: DUE TO PARTS SHORTAGES, ACCESSORIES INCLUDED MAY CHANGE FROM SHIPMENT TO SHIPMENT)
    3/4" diameter, 100# diamond grinding bit with Allen wrench.
    1/4" diameter, 100# diamond grinding bit with Allen wrench - Great for drilling holes!
    Two coolant sponges.
    3/4" standard BitSert - Accommodates 3/4" diameter and smaller grinding bits.
    Grinder bit splash guard.
    Instruction manual.
    Five-year warranty.

    Optional accessories.
    SecondStory work surface - Elevated work surface that makes it easier to grind and drill holes when using small diameter drilling heads or a stacked bit set up.
    FaceShield - Large, 10" X 8-3/4" acrylic face shield provides added protection from grinding and sawing debris.
    MagnaShield - Large, 10" X 8-3/4" face shield has a built-in optical quality convex magnifying surface making it easier to see your work, reduces eye strain and provides additional protection against grinding and sawing debris.

    Machine specifications;
    Machine dimensions: 12" L X 10" W X 7" H
    Machine weight: 6-1/2 lbs
    Grinder housing construction: injection-molded plastic.
    Work surface: 10-1/2" L X 8-1/2" W open grid surface.

    Motor specifications;
    Voltage: 115V (U.S. plug)
    RPM/UPM (idle): 3,500
    Maximum torque: 30 oz-in
    Frequency: 60Hz
    Running current: <1A
    Maximum horse power: 1/11 hp
    Watts in: 215
    Watts out (at peak torque): 55
    Motor shaft outer diameter: 0.312" (5/16") stainless steel.

    • CA$304.39
  • INLAND WIZARD IV (4) GRINDER

    INLAND WIZARD IV (4) GRINDER

    The Wizard IV is the top-of-the-line glass grinder and a best-seller for professionals and serious glass hobbyists because of its power and features. The workhorse 40 oz-in torque motor provides plenty of power to do the jobs you want. Use this American-made machine for grinding and shaping glass edges, stained glass work and drilling holes in glass. This grinder comes with TWO different sized grinding bits that you can use at the same time, eliminating removing/replacing different sized grinding bits. The Wizard IV also includes two of our most popular and useful accessories: the FaceShield and the SecondStory work surface.

    Setup is easy. Simply install the two included diamond grinding bits, wet the coolant sponges with clean water and turn it on with the two-way power switch.

    PLEASE NOTE;
    THIS GRINDER IS CSA APPROVED AND LEGAL TO SELL AND OWN IN CANADA.

    Key features;
    Powerful 40 oz-in torque, 115V motor provides all the power you need to get the job done.
    Machine housing is lightweight, rustproof and impact resistant, making it easy to travel with and very portable.
    Built-in storage compartment conveniently stores small items such as grinder bits, Allen wrenches, sponges and lubricant.
    Huge 14-1/2" X 11-1/2" work surface is much larger than any other glass grinder and provides enough room for larger projects.
    Lift-off coolant reservoir can be easily removed for fast and easy cleaning
    Use TWO different sized grinding bits at the same time.
    Included 10" X 8-3/4" acrylic FaceShield accessory provides added protection from grinding debris.
    Included SecondStory work surface provides an elevated work surface for use with the 1/4" grinding bit and other stacked-bit setups.
    Accepts all Inland Craft diamond grinding bits as well as most others.

    What's included; (NOTE: DUE TO PARTS SHORTAGES, ACCESSORIES INCLUDED MAY CHANGE FROM SHIPMENT TO SHIPMENT)
    FaceShield.
    SecondStory work surface.
    1" diameter, 100# diamond grinding bit with Allen wrench.
    1/4" diameter, 100# diamond grinding bit with Allen wrench (great for drilling holes!)
    Two coolant sponges.
    1" standard BitSert (accommodates 1" diameter grinding bits)
    Grinder bit splash guard.
    Instruction manual.
    Five-year warranty.

    Optional accessories;
    Diamond grinding bits - Available in a wide range of diameters and grits to suit every grinding need
    MagnaShield - Large, 10" X 8-3/4" face shield has a built-in optical quality convex magnifying surface making it easier to see your work, reduces eye strain, and provides additional protection against grinding and sawing debris

    Optional accessories.
    SecondStory work surface - Elevated work surface that makes it easier to grind and drill holes when using small diameter drilling heads or a stacked bit set up.
    FaceShield - Large, 10" X 8-3/4" acrylic face shield provides added protection from grinding and sawing debris.
    MagnaShield - Large, 10" X 8-3/4" face shield has a built-in optical quality convex magnifying surface making it easier to see your work, reduces eye strain and provides additional protection against grinding and sawing debris.

    Machine specifications;
    Machine dimensions: 16" L X 12 1/2" W X 8" H
    Machine weight: 9 1/2 lbs
    Grinder housing construction: high impact ABS housing.
    Work surface: 14 1/2" L X 11-1/2" W

    Motor specifications;
    Voltage: 115V (U.S. plug)
    Running current <1A
    Maximum rpm: 3,550
    Maximum torque: 40 oz-in
    Frequency: 60 Hz
    Maximum horse power: 1/9 hp
    Watts out (under load): 183
    Shaft outer diameter: 0.312" (5/16") stainless steel.

    • CA$461.64
  • INLAND SECOND STORY WORKSURFACE

    INLAND SECOND STORY WORKSURFACE

    The Second Story work surface is an elevated work surface that makes it easier to grind and drill holes when using small diameter drill bits or a stacked-bit setup. This popular accessory is included with the Wizard IV grinder, and fits all WizCG and WizlingCG grinders. It also fits on the SwapTop grinder/shaper conversion kit that is used on the SwapTop 6″ flat lap machine.

    Use this Second Story work surface accessory any time you are grinding or drilling with a stacked 1/4" drill bit or any stacked-bit setup.

    Key features;
    Elevated 5" L X 4-1/2" W open grid work surface makes using smaller grinding bits easier.
    Keeps the glass level while you grind, preventing angled edges and misshapen holes.
    Built-in coolant reservoir makes it easy to keep the the bit lubricated, allowing for easier drilling and longer bit life.
    Easy on / easy off accessory.

    Includes;
    "L"-shaped Second Story coolant sponge.
    User guide.

    • CA$31.10
  • INLAND FACE SHIELD

    INLAND FACE SHIELD

    This large, acrylic face shield provides added protection from grinding and sawing debris. Easy installs onto the Wizard IV grinder, WizCG grinder and the WizlingCG grinder.

    Large 10" (25 cm) x 8-3/4" (22 cm) size provides adequate coverage while being easy to work under.
    Provides added protection from grinding and sawing debris to keep you and your work area safe and clean.
    Simply rinse under running water to clean.

    • CA$31.10
  • INLAND MAGNASHIELD FACE SHIELD

    INLAND MAGNASHIELD FACE SHIELD

    This large, 10″ (25 cm) x 8-3/4″ (22 cm) MagnaShield face shield has a built-in optical quality convex magnifying surface making it easier to see your work, reduces eye strain, and provides additional protection against grinding and sawing debris. Easily installs onto the Wizard IV grinder, WizCG grinder and the WizlingCG grinder.

    Easy to work under and provides added protection from grinding and sawing debris to keep you and your work area safe and clean.
    Simply rinse under running water to clean.

    • CA$31.10
  • INLAND WORKSURFACE for WIZ, WIZLING & WIZARD 4 GRINDERS

    INLAND WORKSURFACE for WIZ, WIZLING & WIZARD 4 GRINDERS

    This reversible, replacement open grid work surface fits Wizard IV, WizCG, and WizlingCG grinders (model years 1994 to current).

    Reversible for twice the life.
    Includes a 3/4" (19 mm) Standard BitSert.
    Fits both 3/4" (19 mm) and 1" (25 mm) current style standard and InvisibleSponge BitSerts.

    Specifications:
    10.25 (26 cm) x 8.625" (21.8 cm)

    • CA$31.10
  • INLAND GRINDER SPONGE

    INLAND GRINDER SPONGE

    Replacement coolant sponge for all 3/4" (19mm) and 1" (25mm) Standard BitSerts.

    PER EACH

    • CA$1.06
  • INLAND  L SHAPE GRINDER SPONGE for SECOND STORY (10 PACK)

    INLAND L SHAPE GRINDER SPONGE for SECOND STORY (10 PACK)

    Replacement “L”-shaped coolant sponge for the SecondStory work surface.
    10 pack.

    • CA$16.60
  • INLAND GRINDER SPLASH GUARD

    INLAND GRINDER SPLASH GUARD

    This plastic, grinder splash guard fits into the rear holes of the standard Bitsert and the SwapTop BitSert.

    Works with the standard BitSert used for the Wiz family grinders.
    Works with the SwapTop BitSert used for the SwapTop flat lap machine.

    • CA$10.30
  • INLAND INVISIBLE SPONGE BITSERT - 3/4"

    INLAND INVISIBLE SPONGE BITSERT - 3/4"

    The Invisible Sponge BitSert is a sponge-free cooling option when grinding with diamond bits for longer bit life and faster grinding. For use with the Wizard IV, WizCG, and WizlingCG grinders. Available in two diameters; 3/4″ and 1″.

    Eliminates the need for a sponge when grinding.
    Design pulls coolant up from the reservoir to keep your diamond bits properly lubricated.
    For use with all grits.

    Specifications:
    Use the ¾" Invisible Sponge BitSert with ¾" (19mm) grinding heads. Compatible with Wizard IV, WizCG, and WizlingCG grinders (1997-current) as well as other Inland models including Wizard (1996-2002), Aero and Impulse (1994-current), PopTop Wizling and Wiz (1996-1997).

    Use the 1" Invisible Sponge BitSert with 1" (25mm) grinding heads. Compatible with Wizard IV and WizCG (1997-current) as well as other Inland models including Wizard (1996-2002) and Impulse (1994-current).

    • CA$10.30
  • INLAND INVISIBLE SPONGE BITSERT - 1"

    INLAND INVISIBLE SPONGE BITSERT - 1"

    The Invisible Sponge BitSert is a sponge-free cooling option when grinding with diamond bits for longer bit life and faster grinding. For use with the Wizard IV, WizCG, and WizlingCG grinders. Available in two diameters; 3/4″ and 1″.

    Eliminates the need for a sponge when grinding.
    Design pulls coolant up from the reservoir to keep your diamond bits properly lubricated.
    For use with all grits.

    Specifications:
    Use the ¾" Invisible Sponge BitSert with ¾" (19mm) grinding heads. Compatible with Wizard IV, WizCG, and WizlingCG grinders (1997-current) as well as other Inland models including Wizard (1996-2002), Aero and Impulse (1994-current), PopTop Wizling and Wiz (1996-1997).

    Use the 1" Invisible Sponge BitSert with 1" (25mm) grinding heads. Compatible with Wizard IV and WizCG (1997-current) as well as other Inland models including Wizard (1996-2002) and Impulse (1994-current).

    • CA$14.46
Products: 124 of 29