Here's a great way to use Mica powders without a clear cap.

You'll need:
Clear Coat Overglaze.
Mica Powder, any colour.
A stencil.
A stippling or short bristle paint brush.
Any type or COE of glass you want.

1. Wash your glass thoroughly.
2. Mix 1 part Mica to 2 parts Clear Coat. (Fig.1)
3. Place your stencil on top of your glass. Stipple the Clear Coat/Mica mixture over the stencil. (Fig.2)
4. Carefully remove the stencil and let the Clear Coat dry. It only takes a few minutes.
5. Fire your glass to at least 1300 for 5 minutes. You can go up to full fuse temperature if you want. (Fig.3)

*Step by step photos below.

Drop items here to shop
Product has been added to your cart

Oops, no products have been added to this category yet.

Go back to the Home page