TORCH MARVERS

Offered below are a variety of graphite and brass torch marvers, in either mixed or adjustable versions.

Products: 17 of 7
Drop items here to shop
Product has been added to your cart
  • GRAPHITE TORCH MARVER - STANDARD DESIGN

    GRAPHITE TORCH MARVER - STANDARD DESIGN

    Graphite is 51 x 76 x 16mm (2" x 3" x 5/8" thick). The front lip 10mm (3/8") wide and the rear lip is 22mm (7/8" tall.)
    Shown mounted on a big hole mandrel for photographic purposes - not included.

    • CA$29
  • GRAPHITE TORCH MARVER - LOW BACK DESIGN

    GRAPHITE TORCH MARVER - LOW BACK DESIGN

    Graphite is 51 x 76 x 16mm (2" x 3" x 5/8" thick). The front lip 10mm (3/8") wide and the rear lip is 22mm (7/8" tall.) and the rear graphite is 35 x 76 x 16mm (1-5/8" x 3" x 5/8")

    The rear graphite is slotted to fit over the rear stainless lip, and is held by two (2) set screws using the same allen wrench. Over tightening can result in broken and/or cracked graphite which we WILL NOT be responsible for.

    Shown mounted on a big hole mandrel for photographic purposes - not included.

    • CA$49
  • GRAPHITE TORCH MARVER - HIGH BACK DESIGN

    GRAPHITE TORCH MARVER - HIGH BACK DESIGN

    Bottom graphite is 51 x 76 x 16mm (2" x 3" x 5/8" thick). The front lip 10mm (3/8") wide and the rear graphite is 44 x 76 x 16mm (1-3/4" x 3" x 5/8")

    The rear graphite is slotted to fit over the rear stainless lip, and is held by two (2) set screws using the same allen wrench. Over tightening can result in broken and/or cracked graphite which we WILL NOT be responsible for.

    Shown mounted on a big hole mandrel for photographic purposes - not included.

    • CA$49
  • NORTEL TORCH MARVER - STANDARD - for MIDRANGE, MAJOR & RED MAX

    NORTEL TORCH MARVER - STANDARD - for MIDRANGE, MAJOR & RED MAX

    Standard Torch Marver that fits the following Nortel torches.

    Midrange Plus, Major, Major Plus, Red Max and Red Max Plus

    Graphite is 51 x 76 x 16mm (2" x 3" x 5/8" thick). The front lip 10mm (3/8") wide and the rear lip is 22mm (7/8" tall.)

    Using the supplied allen wrench, remove the two (2) front cap bolts from the burner side panel and store in a safe place for future use. Install the torch marver using the allen wrench and the two (2) new supplied cap bolts. Snug, but do not over tighten.

    Torch NOT included.

    • CA$29
  • NORTEL TORCH MARVER - "L" DESIGN - for MIDRANGE, MAJOR & RED MAX

    NORTEL TORCH MARVER - "L" DESIGN - for MIDRANGE, MAJOR & RED MAX

    "L" Design Torch Marver that fits the following Nortel torches.

    Midrange Plus, Major, Major Plus, Red Max and Red Max Plus

    Bottom graphite is 51 x 76 x 16mm (2" x 3" x 5/8" thick). The front lip 10mm (3/8") wide and the rear graphite is 44 x 76 x 16mm (1-3/4" x 3" x 5/8")

    The rear graphite is slotted to fit over the rear stainless lip, and is held by two (2) set screws using the same allen wrench. Over tightening can result in broken and/or cracked graphite which we WILL NOT be responsible for.

    Using the supplied allen wrench, remove the two (2) front cap bolts from the burner side panel and store in a safe place for future use. Install the torch marver using the allen wrench and the two (2) new supplied cap bolts. Snug, but do not over tighten.

    Torch NOT included.

    • CA$49
  • NORTEL TORCH MARVER - "L" DESIGN for RED ROCKET

    NORTEL TORCH MARVER - "L" DESIGN for RED ROCKET

    Graphite torch mounted marver fits the Nortel Red Rocket. 3" x 3" x 3/4". Please note: The way this marver mounts it will overlap the center valve controls and make it more difficult to control them.
    • CA$50
  • BRASS TORCH MARVER CONVERSION

    BRASS TORCH MARVER CONVERSION

    Our Brass torch marver kit allows those of you that like to work with the feel of brass, to simply convert OUR standard marver to a brass unit without the use of any tools, etc.

    Simply slide the specially designed brass marver over the existing torch marver and your ready to go. To remove, simply pull off.

    Measures 76mm wide x 63mm deep with a 38mm high back.

    • CA$18