PUSHES

Offered are a variety of pushes, in brass, graphite and stainless steel, both plain and with nipple for your lampworking projects.

Products: 118 of 18
  • GRAPHITE PUSH - 1/2"

    GRAPHITE PUSH - 1/2"

    Graphite push - 13mm (1/2"). Heat, chemical and flame resistant handle cover included.

    • CA$15.95
  • GRAPHITE PUSH - 3/4"

    GRAPHITE PUSH - 3/4"

    Graphite push - 19mm (3/4"). Heat, chemical and flame resistant handle cover included.
    • CA$17.70
  • GRAPHITE PUSH - 1"

    GRAPHITE PUSH - 1"

    Graphite push - 25mm (1"). Heat, chemical and flame resistant handle cover included.
    • CA$19.45
  • GRAPHITE BOWL PUSH - 13mm NO TIP

    GRAPHITE BOWL PUSH - 13mm NO TIP

    A graphite bowl push, measuring 13mm (1/2") in diameter x 76mm (3") in length.

    The handle is 165mm (6-1/2") for an overall tool length of 241mm (9-1/2").

    • CA$16.45
  • GRAPHITE BOWL PUSH - 13mm WITH TIP

    GRAPHITE BOWL PUSH - 13mm WITH TIP

    A graphite bowl push, measuring 13mm (1/2") in diameter x 76mm (3") in length.

    The handle is 165mm (6-1/2") for an overall tool length of 241mm (9-1/2").

    The tip is brass and is 3mm (1/8")" in diameter and 12mm (1/2") in length. Heat, chemical and flame resistant handle cover included.

    • CA$19.95
  • GRAPHITE BOWL PUSH - 16mm NO TIP

    GRAPHITE BOWL PUSH - 16mm NO TIP

    A graphite bowl push, measuring 16mm (5/8") in diameter x 76mm (3") in length.
    The handle is 165mm (6-1/2") for an overall tool length of 241mm (9-1/2").
    Heat, chemical and flame resistant handle cover included.
    • CA$18.60
  • GRAPHITE BOWL PUSH - 16mm WITH TIP

    GRAPHITE BOWL PUSH - 16mm WITH TIP

    A graphite bowl push, measuring 16mm (5/8") in diameter x 76mm (3") in length.
    The handle is 165mm (6-1/2") for an overall tool length of 241mm (9-1/2").
    The tip is stainless steel with a tungsten tip and is 3/32" in diameter and 10mm (3/8") in length. Heat, chemical and flame resistant handle cover included.
    • CA$24.95
  • GRAPHITE BOWL PUSH - 19mm NO TIP

    GRAPHITE BOWL PUSH - 19mm NO TIP

    A graphite bowl push, measuring 19mm (3/4") in diameter x 76mm (3") in length.
    The handle is 165mm (6-1/2") for an overall tool length of 241mm (9-1/2").
    Heat, chemical and flame resistant handle cover included.
    • CA$20.10
  • GRAPHITE BOWL PUSH - 19mm WITH TIP

    GRAPHITE BOWL PUSH - 19mm WITH TIP

    A graphite bowl push, measuring 19mm (3/4") in diameter x 63mm (2.5") in length.

    The handle is 165mm (6-1/2") for an overall tool length of 241mm (9-1/2").

    The tip is brass and is 1/8" in diameter and 13mm (1/2") in length. Heat, chemical and flame resistant handle cover included.

    • CA$24.80
  • HOLLOW BOWL PUSH - 10mm

    HOLLOW BOWL PUSH - 10mm

    A  hollow graphite bowl push with a hollow 3mm (1/8") replaceable, threaded brass tip.

    The custom hollow, stainless handle is 215mm (8-1/2") in length (9-1/2"), the graphite is 63mm (2-1/2") long, for an overall tool length of 289mm (11-3/8").

    Heat, chemical and flame resistant handle cover included.

    • CA$30
  • HOLLOW BOWL PUSH - 13mm

    HOLLOW BOWL PUSH - 13mm

    A  hollow graphite bowl push with a hollow 3mm (1/8") replaceable, threaded brass tip.

    The custom hollow, stainless handle is 215mm (8-1/2") in length (9-1/2"), the graphite is 63mm (2-1/2") long, for an overall tool length of 289mm (11-3/8").

    Heat, chemical and flame resistant handle cover included.

    • CA$30.20
  • HOLLOW BOWL PUSH - 16mm

    HOLLOW BOWL PUSH - 16mm

    A  hollow graphite bowl push with a hollow 3mm (1/8") replaceable, threaded brass tip.

    The custom hollow, stainless handle is 215mm (8-1/2") in length (9-1/2"), the graphite is 63mm (2-1/2") long, for an overall tool length of 289mm (11-3/8").

    Heat, chemical and flame resistant handle cover included.

    • CA$31.20
  • HOLLOW BOWL PUSH - 19mm

    HOLLOW BOWL PUSH - 19mm

    A  hollow graphite bowl push with a hollow 3mm (1/8") replaceable, threaded brass tip.

    The custom hollow, stainless handle is 215mm (8-1/2") in length (9-1/2"), the graphite is 63mm (2-1/2") long, for an overall tool length of 289mm (11-3/8").

    Heat, chemical and flame resistant handle cover included.

    • CA$31.40
  • HOLLOW BOWL PUSH - 25mm

    HOLLOW BOWL PUSH - 25mm

    A  hollow graphite bowl push with a hollow 3mm (1/8") replaceable, threaded brass tip.

    The custom hollow, stainless handle is 215mm (8-1/2") in length (9-1/2"), the graphite is 63mm (2-1/2") long, for an overall tool length of 289mm (11-3/8").

    Heat, chemical and flame resistant handle cover included.

    • CA$31.60
  • RINGED DOT PUSH - 6mm

    RINGED DOT PUSH - 6mm

    This handy push allows you to create a "Depression Ring" around the base of your dots.

    Graphite is 38mm (1-1/2") in length, with an aluminum handle, for an overall tool length of 165mm (6-1/2").

    This push allows you to create a dot with a depressed ring around the base. Can be used with the base bead alone or over an existing dot. Experiment with different effects in the depression.

    The tool is threaded into the handle for a secure fit, and comes with our heat, chemical and flame resistant handle cover.

    • CA$9
  • RINGED DOT PUSH - 8mm

    RINGED DOT PUSH - 8mm

    This handy push allows you to create a "Depression Ring" around the base of your dots.

    Graphite is 38mm (1-1/2") in length, with an aluminum handle, for an overall tool length of 165mm (6-1/2").

    This push allows you to create a dot with a depressed ring around the base. Can be used with the base bead alone or over an existing dot. Experiment with different effects in the depression.

    The tool is threaded into the handle for a secure fit, and comes with our heat, chemical and flame resistant handle cover.

    • CA$9.20
  • RINGED DOT PUSH - 10mm

    RINGED DOT PUSH - 10mm

    This handy push allows you to create a "Depression Ring" around the base of your dots.

    Graphite is 38mm (1-1/2") in length, with an aluminum handle, for an overall tool length of 165mm (6-1/2").

    This push allows you to create a dot with a depressed ring around the base. Can be used with the base bead alone or over an existing dot. Experiment with different effects in the depression.

    The tool is threaded into the handle for a secure fit, and comes with our heat, chemical and flame resistant handle cover.

    • CA$9.80
  • RINGED DOT PUSH - 12mm

    RINGED DOT PUSH - 12mm

    This handy push allows you to create a "Depression Ring" around the base of your dots.

    Graphite is 38mm (1-1/2") in length, with an aluminum handle, for an overall tool length of 165mm (6-1/2").

    This push allows you to create a dot with a depressed ring around the base. Can be used with the base bead alone or over an existing dot. Experiment with different effects in the depression.

    The tool is threaded into the handle for a secure fit, and comes with our heat, chemical and flame resistant handle cover.

    • CA$10.20