NECKING TOOLS

Products: 18 of 8
  • V NECK - GRAPHITE

    V NECK - GRAPHITE

    This graphite V-shaped blade is an excellent tool for creating very tight shaping and restrictions in either blown or solid work. The Necking Tool will stand alone on your bench or use the mounting holes for an extra stable position. The total size of the tool is 3" tall X 3" wide.

    • CA$24
  • V NECK - SILICA BRONZE

    V NECK - SILICA BRONZE

    This Silica Bronze V-shaped blade is an excellent tool for creating very tight shaping and restrictions in either blown or solid work. The Necking Tool will stand alone on your bench or use the mounting holes for an extra stable position. The total size of the tool is 3" tall X 3" wide. The material provides the smoothness of graphite, but holds up like stainless steel. It also leaves the least amount of material on the glass, per any material out there. It also does not require the use of wax to work with.
    • CA$24
  • V NECK - STAINLESS STEEL

    V NECK - STAINLESS STEEL

    This Stainless Steel V-shaped blade is an excellent tool for creating very tight shaping and restrictions in either blown or solid work. The Necking Tool will stand alone on your bench or use the mounting holes for an extra stable position. The total size of the tool is 3" tall X 3" wide.
    • CA$21
  • V NECK - BRASS

    V NECK - BRASS

    This Brass V-shaped blade is an excellent tool for creating very tight shaping and restrictions in either blown or solid work. The Necking Tool will stand alone on your bench or use the mounting holes for an extra stable position. The total size of the tool is 3" tall X 3" wide.
    • CA$21
  • V NECK - STAINLESS STEEL STAND MOUNTED

    V NECK - STAINLESS STEEL STAND MOUNTED

    Stainless steel V neck, sharpened, and mounted to a 152 x 152mm (6" x 6") stand with rubber feet.
    • CA$50
  • V NECK - STAINLESS STEEL in  ADJUSTABLE STAND

    V NECK - STAINLESS STEEL in ADJUSTABLE STAND

    Stainless steel V neck, sharpened, and mounted to an adjustable stand the adjusts from 203mm to 305mm (8" to 12").
    • CA$70
  • V NECK - GRAPHITE - HAND HELD

    V NECK - GRAPHITE - HAND HELD

    Our graphite V Neck - only reshaped to accept a handle. Great for lathe work and free forming. 254mm (10") in length.
    • CA$27.60
  • V NECK - GRAPHITE - HAND HELD - FLAT V

    V NECK - GRAPHITE - HAND HELD - FLAT V

    Our graphite V Neck - only reshaped to accept a handle, with the exception that this one has 6mm (1/4") flat sides on the V. This allow you to create wider, flatter V's, or configure the edges of the V to the shape you want. Great for lathe work and free forming. 254mm (10") in length.
    • CA$25.60