HOLDING FINGERS - GRABBERS

Select from a variety of holding fingers (grabbers), either with flare or no flare.
Products: 19 of 9
  • HOLDING FINGERS - MEDIUM - NO FLARE

    HOLDING FINGERS - MEDIUM - NO FLARE

    These medium holding fingers (6 wires) open over 2 inches (wires bend easily to hold larger objects as well) and close down to grasp objects as small as 4 mm. Lightweight, easy to handle, about 14 inches long with a locking screw set. High quality Stainless Steel, will not leave rust marks on your work !

    • CA$61
  • HOLDING FINGERS - LARGE - NO FLARE

    HOLDING FINGERS - LARGE - NO FLARE

    These large holding fingers (6 wires) open over 4 inches (wires bend easily to hold larger objects as well) and close down to grasp objects as small as 4 mm. Lightweight, easy to handle, about 16 inches long with a locking screw set. High quality Stainless Steel, will not leave rust marks on your work !
    • CA$64
  • HOLDING FINGERS - LARGE - with FLARE

    HOLDING FINGERS - LARGE - with FLARE

    This gripper tool (6 wires) opens to approximately 4 inches (wires bend easily to hold larger objects as well) and closes down to zero. Lightweight, easy to handle, 16 inches long overall with a locking screw set.

    They're perfect for spinning goblet feet, and the upturned tips ensure the wires won't scratch your work. And the high quality Stainless Steel ensures there won't be rust!
    **Made in the USA** 

    • CA$64
  • HOLDING FINGERS - LARGE INSIDE OUT w/ PLATE & LOCKING SCREW

    HOLDING FINGERS - LARGE INSIDE OUT w/ PLATE & LOCKING SCREW

    American large inside out claw w/ plate locking set screw.

    This grabber is about 14.5" long overall with a 1/2" thick handle. The handle portion is 6.5 to 7" long. The wire portion is just shy of 8" or so. The opening is about 3", however with some slight pressure you can bend the wires a bit bigger. When fully closed the opening reduces to about 1". 

    • CA$95
  • ECONOMY INSIDE OUT CLAW GRABBER with SET SCREW

    ECONOMY INSIDE OUT CLAW GRABBER with SET SCREW

    These medium inside out holding fingers (6 wires) open to approximately 2 1/4 inches (wires bend easily to hold larger objects as well) and close down to grasp objects as small as 2 mm. Lightweight, easy to handle, 12 inches long overall with a metal locking screw set. Imported.
    • CA$30
  • ECONOMY CLAW GRABBER with SET SCREW

    ECONOMY CLAW GRABBER with SET SCREW

    These Claw Grabbers With Set Screw (6 wires) open to approximately 2" (the wires easily bend to hold larger objects as well) and close down to grasp objects as small as 2 mm. Lightweight, easy to handle, with a total length of 12" and a 6" handle. Imported.
    • CA$34
  • ECONOMY HOLDING FINGERS - INSIDE OUT with PLATE & LOCKING SET SCREW

    ECONOMY HOLDING FINGERS - INSIDE OUT with PLATE & LOCKING SET SCREW

    The Inside Out Claw w/ Plate & Locking Set Screw has a 3.5" opening for holding a wide variety of objects. The total closed length is 15" and the open length is 19.5" with a 7" handle.
    • CA$55
  • ECONOMY BALL / LOOPED GRABBER with SET SCREW

    ECONOMY BALL / LOOPED GRABBER with SET SCREW

    The Economy Ball / Looped Grabbers With Set Screw are a great option for the price. They feature a 12" total length with a 6" handle. These grabbers have a 2" opening, but the wires are able to be bent out for a larger opening.
    • CA$40
  • BALL / LOOPED CLAW GRABBER with LOCKING SET SCREW

    BALL / LOOPED CLAW GRABBER with LOCKING SET SCREW

    Ball or looped claw grabbers are excellent for holding countless different round objects such as marbles, ornaments, or vessels. These looped grabbers (4 wires) open to approximately 3 1/4 inches (wires bend easily to hold larger objects as well) and close down to grasp objects as small as 1 inch. Lightweight, easy to handle, 14 inches long overall with a locking screw set. This high quality Stainless Steel will not leave rust marks on your work! **Made in the USA!**

    • CA$64