- per page
HIGH TEMP FUSING PEN - BLACK
Catalogue No.: 265-4800
DYKEMŽ High Temp markers are specifically formulated for marking surfaces that are exposed to extreme high temperature environments. Marks should be made at room temperature and can be applied to almost any non-porous surface such as metal, glass, and ceramic. When marking on these materials, the marks will become permanently fused to the surface after heat is applied. Certain colours can withstand temperatures up to 2000?F (1093?C).
High Temp TXP: Features a stainless steel roller ball tip and a rubber pressure bulb to control paint flow. The TXP is designed to permanently write on dirty, oily, greasy or rough surfaces. The unique design allows you to mark at any angle, upside down and even underwater. The specially formulated oil-based paint withstands extreme conditions. Drying Time: 25 - 30 minutes.
High Temp TXP: Features a stainless steel roller ball tip and a rubber pressure bulb to control paint flow. The TXP is designed to permanently write on dirty, oily, greasy or rough surfaces. The unique design allows you to mark at any angle, upside down and even underwater. The specially formulated oil-based paint withstands extreme conditions. Drying Time: 25 - 30 minutes.
Our price: CA$10.83
CMC GUM POWDER
Catalogue No.: 482616
CMC Gum Powder is a non toxic powder that allows you to make your own "Squirt Glass" medium to mix with powdered glass frits.
Use in squeeze bottles to create lines, or tool it to do custom textures, unusual shapes and sculptural elements.
One (1) pound package in a resealable bag. Makes ten (10) quarts when mixed with water.
Use in squeeze bottles to create lines, or tool it to do custom textures, unusual shapes and sculptural elements.
One (1) pound package in a resealable bag. Makes ten (10) quarts when mixed with water.
Our price: CA$33.50
THINFIRE SHELF PAPER
Catalogue No.: BU-8210
Bullseye shelf paper is a heat resistant, light weight ceramic impregnated paper, which provides excellent separation between kiln shelf and glass in kiln firing applications to 1600°F. Sheet size is approximately 508 x 508mm (20" x 20"). Priced per sheet.
USAGE: Use ThinFire as you would any lighter weight ceramic fiber material on the kiln shelf. A single layer of paper will prevent molten glass from sticking to your shelf at full fuse temperatures (1450° to 1550°F).
EDGE CURL: Due to its extremely light weight, ThinFire is easily affected by glass movement, and will sometimes pull into or curl over the glass perimeter at maximum firing temperatures. Contact with the top surface of the glass will leave an undesirable haze. To prevent edge curl, weight the outer corners of the paper with off-cuts of glass, broken pieces of kiln shelf, old glass globs, etc.
CLEAN UP: on firing, ThinFire disintegrates to a dusty tissue. Avoid breathing residual dust. Wear a respirator (NOISH approved for dusts) during disposal.
USAGE: Use ThinFire as you would any lighter weight ceramic fiber material on the kiln shelf. A single layer of paper will prevent molten glass from sticking to your shelf at full fuse temperatures (1450° to 1550°F).
EDGE CURL: Due to its extremely light weight, ThinFire is easily affected by glass movement, and will sometimes pull into or curl over the glass perimeter at maximum firing temperatures. Contact with the top surface of the glass will leave an undesirable haze. To prevent edge curl, weight the outer corners of the paper with off-cuts of glass, broken pieces of kiln shelf, old glass globs, etc.
CLEAN UP: on firing, ThinFire disintegrates to a dusty tissue. Avoid breathing residual dust. Wear a respirator (NOISH approved for dusts) during disposal.
Our price: CA$3.98
SPECTRUM GLASS PAPYROS KILN SHELF PAPER
Catalogue No.: 48227
Papyros Kiln Shelf Paper is an extra sturdy ceramic-based product specially formulated for glass fusing. Papyros provides excellent separation, preventing glass projects from sticking to the kiln shelf when placed between the shelf and the underside of the glass. Papyros can also be re-used and re-fired for multiple firings. Post firing integrity depends on the type of glass used, the nature of the project and the final fusing temperature. This paper can be fired up to 1600 deg. F.
Sheet Size - 20.5 in. x 20.5 in. (52cm x 52cm)
Sheet Size - 20.5 in. x 20.5 in. (52cm x 52cm)
Our price: CA$3.98
FIBER PAPER - 1/32" x 24" x 96"
Catalogue No.: FUS-8125
Multi-use paper can be used instead of shelf primer. Doesn't stick to projects, but leaves a slight texture on the back of glass.
- 1/32" x 24" x 96"
- 1/32" x 24" x 96"
Our price: CA$50.43
FIBER PAPER - 1/16" x 24" x 24"
Catalogue No.: 482202
Multi-use paper can be used instead of shelf primer. Doesn't stick to projects, but leaves a slight texture on the back of glass.
- 1/16" x 24" x 24"
- 1/16" x 24" x 24"
Our price: CA$13.78
FIBER PAPER - 1/16" x 24" x 48"
Catalogue No.: FUS-8123
Multi-use paper can be used instead of shelf primer. Doesn't stick to projects, but leaves a slight texture on the back of glass.
- 1/16" x 24" x 48"
- 1/16" x 24" x 48"
Our price: CA$13.78
FIBER PAPER - 1/8" x 24" x 24"
Catalogue No.: 4822
Multi-use paper can be used instead of shelf primer. Doesn't stick to projects, but leaves a slight texture on the back of glass.
- 1/8" x 24" x 24"
- 1/8" x 24" x 24"
Our price: CA$19.20
FIBER BLANKET (1/2" x 24" x 24")
Catalogue No.: 48510
- 1/2" x 24" x 24" - Bakes down to 1/4". May be used with Fiber Mold Hardener - contains no asbestos.
Our price: CA$15.30
FIBER BLANKET (1" x 20" x 24")
Catalogue No.: 48511
- 1" x 20" x 24", - Bakes down to 1/2". May be used with Fiber Mold Hardener - contains no asbestos.
Our price: CA$33.00
FIBER BLANKET - 1/2" x 24" x 25' roll.
Catalogue No.: 48512
- 1/2" x 24" x 25' roll.
Our price: CA$238.00
MOIST PACK - 1/4"
Catalogue No.: 48212
A 6mm (1/4") refractory fiber with a heat setting rigidizer. Specifically designed to construct a mold from an existing shape.
Freezing affects this product. From late November till early April, order fiber blanket and fiber mold hardener separately.
508mm x 609mm (20" x 24") sheet
Freezing affects this product. From late November till early April, order fiber blanket and fiber mold hardener separately.
508mm x 609mm (20" x 24") sheet
Our price: CA$87.10
MOIST PACK - 1/2"
Catalogue No.: NS48215
A 12.7mm (1/2") refractory fiber with a heat setting rigidizer. Specifically designed to construct a mold from an existing shape.
Freezing affects this product. From late November till early April, order fiber blanket and fiber mold hardener separately.
508mm x 609mm (24" x 6" x 1/2") sheet
Freezing affects this product. From late November till early April, order fiber blanket and fiber mold hardener separately.
508mm x 609mm (24" x 6" x 1/2") sheet
Our price: CA$29.50
REFRACTORY FIBER ROPE
Catalogue No.: 48M011
1/4" Diameter. Create intricate textures and patterns in fused glass art. Keeps openings while firing. Twisted 3-ply ceramic fiber may be separated for 1/8" - 3/16" strands. Withstands temperatures to 2300F(1260C).
SOLD BY THE FOOT
SOLD BY THE FOOT
Our price: CA$2.39
PRIMO PRIMER
Catalogue No.: 48235
Primo Primer is reputed to be the best available!
Announcing a breakthrough in kiln shelf priming. Hotline Primo PrimerTM fires to 1550şF (843şC) and higher. Glass does not stick to the shelf. Primer does not stick to the glass. It removes from shelf after firing by brushing or by wiping with a damp sponge. No more tedious and messy scraping.
Packed in easy access plastic containers.
1-1/2lb (.68kg) - Mix with water. (5 LB Available)
Announcing a breakthrough in kiln shelf priming. Hotline Primo PrimerTM fires to 1550şF (843şC) and higher. Glass does not stick to the shelf. Primer does not stick to the glass. It removes from shelf after firing by brushing or by wiping with a damp sponge. No more tedious and messy scraping.
Packed in easy access plastic containers.
1-1/2lb (.68kg) - Mix with water. (5 LB Available)
Our price: CA$10.50
HI TEMP PRIMER
Catalogue No.: FUS-48321
HotLine high temp. primer is a special formulation of alumina and low-fluxing clays developed to withstand the high kiln temperatures required for raking. Contains a dye which burns off when firing. An excellent smooth finish between the glass and kiln shelf. Hi-Fire Shelf Primer is also excellent for coating mandrels for beadmaking.
24oz (750g) - Mix with water.
24oz (750g) - Mix with water.
Our price: CA$9.96
HOTLINE SHELF PRIMER
Catalogue No.: 4819
HotLine shelf primer is a high temperature, low-fluxing clay and alumina mixture formulation which contains suspension agents and a colour-coded dye that burns off at 800şF (427şC). Used according to directions, shelf primer is the best insurance that your fused work will not stick to the kiln shelf.
24 oz. (680g)
24 oz. (680g)
Our price: CA$9.96
LIVER OF SULPHUR
Catalogue No.: 605051004
Liver of Sulphur is a chemical for antiquing copper and silver only. Changes colour to darker shades from brown to black. Directions on label.
4 oz bottle.
4 oz bottle.
Our price: CA$7.52
SUPER SPRAY (LEAD FREE)
Catalogue No.: SUPSPR8
Lead free Super Spray prevents devitrification on glass surfaces. Apply to fused projects before firing.
- 8oz.
Fire to 1300F - 1700F for a glossy, glass-like shine.
Proven safe for food bearing surfaces.
Will not discolour reds, oranges, or other sensitive colours.
Fire to 1300F - 1700F for a glossy, glass-like shine.
Proven safe for food bearing surfaces.
Will not discolour reds, oranges, or other sensitive colours.
Our price: CA$18.72
BACK MAGIC (DISCONTINUED PRODUCT)
Catalogue No.: BACMAG4
Adds shine and texture to the back side of fused pieces.
4oz (118ml) bottle
Spray or brush on piece, fire to 975deg.F, well below slumping temperatures. Will not
eliminate texture, but makes most surfaces glossy and smoother. For use after inital slumping.
4oz (118ml) bottle
Spray or brush on piece, fire to 975deg.F, well below slumping temperatures. Will not
eliminate texture, but makes most surfaces glossy and smoother. For use after inital slumping.
Our price: CA$12.66
FUSE MASTER CLEAR COAT OVERGLAZE
Catalogue No.: CLECOA
Produces a durable, glossy shine on the surface of fired glass pieces and helps prevent devitrification. Completely lead free and safe to use on all food bearing surfaces.
Also used as an excellent medium for painting with Mica Powders.
Also used as an excellent medium for painting with Mica Powders.
Our price: CA$11.94
HOTLINE WASH AWAY
Catalogue No.: 522010
Easily removes baked-on shelf primer (kiln-wash) from the bottom of fused projects, like black glass, hot colors and opalescent glass. Apply without dilution to the baked-on primer and then lightly scrub with a plastic scouring pad. This should remove even the most stubbornly adhered primer.
236ml (8oz).
236ml (8oz).
Our price: CA$7.43
BENDING GLAZE
Catalogue No.: 4847
Designed to mature at 1100°F, this overglaze can be brushed or sprayed directly onto the surface or ground edges of a piece of glass to prevent devitrification during the slumping cycle. Ideal for single layer bending such as bent lamp panels. This product needs to be fired at least to 1100F for at least 5 min. Holds up to 1300F. NOT safe for food-bearing surfaces.
4oz (118ml) bottle
Our price: CA$16.90
KLYR-FIRE
Catalogue No.: FUS-G7405
Klyr-Fire may be used as a glue to hold glass in place during firing, or as a mixing medium for glass painting.
16oz (474ml)bottle - Water based.
16oz (474ml)bottle - Water based.
Our price: CA$11.46
FRITZ - SPRITZ (8 oz.)
Catalogue No.: 582615
A ready mixed medium to be used with frit powders, mica and other decorative powders for creating imagery on glass.
Our price: CA$19.90
GLASS STAMPING MEDIUM - 30 ML.
Catalogue No.: STAMED
Rubber stamps offer a wide variety of detailed images and textures. By using this Glass Stamping Medium, they can be easily used in glass fusing.
This is an oil-based medium that is perfect for getting and holding those fine details found in rubber stamps.
Stamping Medium can be used with glass enamels or Mica Powders.
Comes complete with full instructions.
This is an oil-based medium that is perfect for getting and holding those fine details found in rubber stamps.
Stamping Medium can be used with glass enamels or Mica Powders.
Comes complete with full instructions.
Our price: CA$29.90
GLASTAC
Catalogue No.: BU-8234
Slow drying fusers glue. Organic colourant lets you see where you put it. Burns off during firing. Convenient squeeze bottle.
4oz (118ml) bottle
4oz (118ml) bottle
Our price: CA$6.90
FUSING SOLUTION GLUE - 8 OZ
Catalogue No.: FUS-SOL
Finally, a clean burning glue that prevents devitrification!
Fuse Master Fusing Solution is a gel that bonds frit, powders, enamels and paints before you get it to the
kiln and prevents devitrification during firing. Fusing Solution is a mixture of organic gums with an
overglaze base that is ideal for all fusing applications. It is thicker and has more holding power than most
popular binders. You can apply it onto your base glass with a brush, thin with water to make a spray or
just draw with its applicator tip. However you apply it, you will be pleased with its results.
Fuse Master Fusing Solution is a gel that bonds frit, powders, enamels and paints before you get it to the
kiln and prevents devitrification during firing. Fusing Solution is a mixture of organic gums with an
overglaze base that is ideal for all fusing applications. It is thicker and has more holding power than most
popular binders. You can apply it onto your base glass with a brush, thin with water to make a spray or
just draw with its applicator tip. However you apply it, you will be pleased with its results.
Our price: CA$17.60
FUSING SOLUTION GLUE - 32 OZ
Catalogue No.: FUS-SOL32
Finally, a clean burning glue that prevents devitrification!
Fuse Master Fusing Solution is a gel that bonds frit, powders, enamels and paints before you get it to the
kiln and prevents devitrification during firing. Fusing Solution is a mixture of organic gums with an
overglaze base that is ideal for all fusing applications. It is thicker and has more holding power than most
popular binders. You can apply it onto your base glass with a brush, thin with water to make a spray or
just draw with its applicator tip. However you apply it, you will be pleased with its results.
Fuse Master Fusing Solution is a gel that bonds frit, powders, enamels and paints before you get it to the
kiln and prevents devitrification during firing. Fusing Solution is a mixture of organic gums with an
overglaze base that is ideal for all fusing applications. It is thicker and has more holding power than most
popular binders. You can apply it onto your base glass with a brush, thin with water to make a spray or
just draw with its applicator tip. However you apply it, you will be pleased with its results.
Our price: CA$52.30
TRIOLYSE ADHESIVE
Catalogue No.: 500-7720
A powerful multi-purpose, 2-part easy to use adhesive. Applies as thin as water and makes an unbreakable bond that will hold metal to glass and glass to glass. Includes 14 ml of activator and 10 ml of adhesive.
Our price: CA$13.30
- per page
