- per page
For "chipping" glass. For the "Do-it-Yourself" glue chip glass maker. It is the select grade of glue for this purpose. Gram strength varies from 108 to 135, with an average of 122. Complete, easy-to-follow instructions are included. Be creative and make your own beautiful, glue-chipped glass.
THIS PRODUCT IS BEING DISCONTINUED
2.5mm (3/32") mandrel
High quality metal
Sizes are 13 x 40, 15 x 45, 17 x 50 (2 x 1mm center indent and 1.5 x .75mm end indents)
Mandrel slots are 4mm, and will accept up to a single dipped 5/32" mandrel.
Heat, chemical and flame resistant handle cover included.
Sizes are 13 x 40, 15 x 45 and 17 x 50mm. Center rib is 1mm and other ribs are .75mm.
Mandrel slots are 4mm, and will accept up to a single dipped 5/32" mandrel.
Heat, chemical and flame resistant handle cover included.
Sizes are 10 x 25, 11 x 30, 12 x 35mm (2 x 1mm center indent and 1.5 x .75mm end indents)
Mandrel slots are 4mm, and will accept up to a single dipped 5/32" mandrel.
Heat, chemical and flame resistant handle cover included.
Sizes are 10 x 25, 11 x 30 and 12 x 35mm. Center rib is 1mm and other ribs are .75mm.
Mandrel slots are 4mm, and will accept up to a single dipped 5/32" mandrel.
Heat, chemical and flame resistant handle cover included.
This brass reamer consists of a brass head, 89mm (3-1/2") in length, tapering from 2mm to 15mm, with a handle 197mm (7-3/4") in length, for a well balanced tool that is 289mm (11-3/8") in overall length.
Used to expand holes in the ends or sides of tubing, or to create any opening.
Heat, chemical and flame resistant handle cover included.
NOTE: These are being sold as seconds because the handle mounting hole was drilled at a slight offset. This will have no effect as long as you are not using these for lathe work.
A dark blue opaque rod swirled with goldstone on the outside. It is recommended that you use
these rods over a base colour in order to perserve the goldstone. Caution must be used not to overwork
the opaque rods or you will lose the luster and goldstone.
CLICK ON DETAILS TO SEE WHAT'S IN THIS ISSUE
CLICK ON DETAILS TO SEE WHAT'S IN THIS ISSUE
CLICK ON DETAILS TO SEE WHAT'S IN THIS ISSUE
CLICK ON DETAILS TO SEE WHAT'S IN THIS ISSUE
127mm x 127mm x 10mm (5" x 5" x 3/8") Use for flattening the bottoms of vessels, beads, etc., or wherever this action is required. Also excellent for laying gold, silver or palladium leaf on while you roll the hot glass bead over them.
NOTE: These are being sold off as seconds as the machining came out rougher than it should be, but a sanding with some fine grade sandpaper will make them prefectly smooth again.
152mm x 152mm x 10mm (6" x 6" x 3/8") Use for flattening the bottoms of vessels, beads, etc., or wherever this action is required. Also excellent for laying gold, silver or palladium leaf on while you roll the hot glass bead over them.
NOTE: These are being sold off as seconds as the machining ended up rougher than they should be, but a light sanding with a fine grade sandpaper will make them perfectly smooth again.
4 - 6mm
Priced per rod
4 - 6mm
Priced per rod
Sizes are 50 x 30mm with a 10mm stem and 40 x 25mm with an 8mm stem.
Mandrel slots are 4mm, and will accept up to a single dipped 5/32" mandrel.
Heat, chemical and flame resistant handle cover included.
A beautiful pink transparent rod swirled with goldstone on the outside. It is recommended that you use
these rods as a base in order to not burn off the goldstone. The goldstone and luster will still be visible.
TAKE A GAMBLE AND SEE WHAT YOU GET! YOU WON'T BE DISAPPOINTED. PERFECT FOR PRACTICING OR EXPERIMENTING.
A beautiful red transparent rod swirled with goldstone on the outside. It is recommended that you use
these rods as a base in order to not burn off the goldstone. The goldstone and luster will still be visible.
Roll and form perfect round ribbed beads and marbles with our round ribbed bead shaper mold.
Hole sizes are 10, 13, 16, 19 & 22mm (3/8", 1/2", 5/8", 3/4" & 7/8").
Each size has 9 equally spaced ribs across its' diameter.
Mandrel slots are 4mm, and will accept up to a single dipped 5/32" mandrel.
Heat, chemical and flame resistant handle cover included.
NOTE: Due to a machining error - there are only 7 ribs instead of 9 ribs resulting in a shape that's more similar to a drum than a round - therefore, these are being sold off at half price
First come, first get.
Very limited quantities.
Sizes are 50 x 25mm with a 15mm neck and 40 x 20mm with a 12mm neck.
Mandrel slots are 8mm, and will accept up to a single dipped 5/16" mandrel.
Heat, chemical and flame resistant handle cover included.
NEW
Sizes are 50 x 25mm with a 15mm neck and 40 x 20mm with a 12mm neck.
Mandrel slots are 8mm, and will accept up to a single dipped 5/16" mandrel.
Heat, chemical and flame resistant handle cover included.
NEW
Sizes are 50 x 30mm with a 20mm neck and 40 x 25mm with a 15mm neck.
Mandrel slots are 8mm, and will accept up to a single dipped 5/16" mandrel.
Heat, chemical and flame resistant handle cover included.
NEW
- per page
